Jump to content

Victor XM-PX33 Disassembly Help

Rate this topic


Boomchild

Recommended Posts

So I have this Victor XM-PX33 which seems to have a loose headphone jack. When I looked to taking the unit apart, I can only locate one screw on the outside of the case which does not seem to allow me to get the unit's cover off.  I was wondering if anyone here has worked on these and can shed some light on how to disassemble the unit. Any help would be greatly appreciated. Thanks.

Link to comment
Share on other sites

A diagram and instructions on how to at least start to disassemble this unit can be found at the link below.  Hopefully you will be able to figure out the rest of the process.  It looks like the rear casing will have to be removed after you have taken apart the front of the unit.  I hope this helps and good luck:)

 

http://www.manualscenter.com/manuals/jvc/xmpx33wtbu-service-manual.html#.VCEo-mex7IU

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...