Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/12/2020 in all areas

  1. Great news! Really glad you got it working again :-)
    1 point
  2. The OWH needs to be UNDER the metal plate. See pictures of the post : Metal slats needs to be straightened. Do the "virtual MD" trick (no MD inside) Put the OPU/OWH to the center (>> button) Unscrew a little (1 or 2mm) to release the OWH (red) Pass gently the OWH under the metal plate Re-screw the OWH on OPU Use scalpel (or fine tool) to twist big metal slats (yellow) to re-adjust the OWH height Use scalpel to twist the little metal slats to make the head flat against to the disc (orange). HINT : Put a minidisc and make STOP-REC-STOP-REC... to up and down the head and untwist theses wires step by step. Once the head is flat against the disc when the head is down in recording mode like this : Then try record few seconds and play what you recorded. If you break tiny metal wires (orange) = get a new OWH, you failed.
    1 point
×
×
  • Create New...