Jump to content

H4rry

Members
  • Posts

    22
  • Joined

  • Last visited

Posts posted by H4rry

  1. I think you have taken me up wrong in part.

    I tried a factory disc in four machines yesterday three of them I've owned for about three years the denon 991r's

    The machine which I am concerned about at this minute in time is the Denon 1050 this was the machine that I have just purchased.

    It was checked before it was shipped and found to be ok but as I stated above the seller is willing to give me a full refund and send a courier to come and collect it from me.

    He thinks maybe it has been dropped by the courier and this may be part of the problem.

    H4rry

  2. I was speaking to a friend of mine this morning who worked in the BBC engineering dept. He is now out working on his own but still does work for them from time to time.

    He hasn't got a meter but said he would check and see if the BBC had one.

    Another option I have is to return the unit to the company I purchased it from for a full refund, I've been told one of there engineers checked the unit out on rec & play with a number of different discs & it worked fine.. They think the machine may have got a knock during shipping & this may have knocked the laser lineament out.

    H4rry

  3. By "get it serviced" i did NOT mean the manufacturer. Not Sony, nor any other mfr wants, or even currently offers, to service MD equipment, which is considered an obsolete technology.

    That is one reason we folks cluster here, because we, like you, try to keep the technology alive and fresh past its sell-by date, to coin a phrase.

    Point taken Stephen.

    OK I called with a friend today and got a factory minidisc from him the best of Eric Clapton.

    so 30 seconds after putting it into the 1050 error 2b came up.Eric refused to sing!

    I then tried the disc in my 3x 991 machines

    Machine #1 cued in 5 seconds #2 in 10 seconds and # 3 came up with error 2b

  4. The problem with sending something of to get serviced is that it would cost as much as the price of the meter I'm guessing.

    I work with Canon camera gear and every time it has to go to canon it's almost £100 for a check and clean and twice it's had to go back for repair at the cost of almost £400 each time, and there's no reason that if the Denon has to go back to them that this will be a low cost fix.

    Regards

    H4rry

  5. Believe it or not, the read adjustment of Laser Power (LP) is much more sensitive than the write adjustment. It sounds like it's simply in need of adjustment if you can write perfectly good disks.

    However you may need an LP meter to check it out - currently Jim doesn't have one. I do, but I'm 5000 miles away in Canada.

    You never answered my question about Tom Lehrer, so rather than ask it again, I will say that your name reminds me of him talking about his friend Hen3ry ("the 3 was silent, you see").

    Stephen

    Hi Stephen,

    I was not sure if you were referring to me on the Tom Lehrer as he means nothing to me, never heard of him. My first name is Harry this is used on many forums so the nearest I can get to that is H4rry 4 looking almost like the letter A...

    There could well be a problem with the play as I had a disc in playing the other night it played ok until the last couple of tracks it started to freeze.. When I checked the disc in another machine it played perfect.

    I have a couple of rerecorded discs around somewhere but where! If I find them I'll try one out.

    I shall try a few more recordings the disc that was recorded on Friday was recorded as one 80min track, So this time I shall try a few different tracks.

    Regards

    H4rry

  6. Thanks for the reply Jim,

    I recorded a full 80min MD on the 1050 on Friday, I then ejected the disc and inserted it into the machine again but it would not play error 73 came up on the display.

    I have played the disc on a couple of other machines without any problem.

    I purchased this machine to do backup recordings, I use Denon DN-991R as playback machines I have 3 off these http://elektrotanya.com/denon_dn-m991r.pdf/download.html Also a Denon DN-2000R http://elektrotanya.com/denon_dn-m2000r.pdf/download.html

    These are all Denon pro machines, I also have a number of Sony MD machines but they are all consumer machines. A couple MDS-302 and an MDS-303

    The 302's both had to go back to Sony for repair about a year after I got them they cost £500 each to buy and then sony would not stand over them for repair and cost a further £200 each for repair, needless to say that was the end of my purchasing Sony products so I moved to Denon.

    I am in the UK only problem is not the mainland as I'm in NI.

    I'll be in touch.

    Regards

    H4rry.

  7. Thanks for the reply's.

    By the sound of things I would be better making do with what I have a Sony MDS-NT1

    I purchased the NT1 so i could write tracks onto MD from my laptop in a hurry so they could be played in my car, but the speed has not been as fast as I thought it would be.

    I don't really like the sonicstage software but there is nothing else out there so I just may put up with it.

    The thought was to find out what else was out there in the NetMD world and work from there.

    as for digital outputs that's not a problem I have a number of machines that can do this.

    Regards

    H4rry

  8. It's nice to know there are still new minidiscs available.

    I don't think i'll be ditching minidisc any time soon after purchasing my first machine approx 17 years ago a Sony MDS-302... 18 years on I now have 12 units mostly Sony and Denon.

    So I'll not be giving them up any time soon.

  9. I'm looking for a full size minidisc stand alone play/recorder with NetMD

    What models are available is there a list anywhere I know the machines are no longer made but may be able to pick a s/h one up on ebay but a model number will make this a lot easier.

    Regards

    H4rry

  10. Hi I recently purchased a Sony MDS-NT1 and have the sonic stage 4.3 software but what I'd like to know..Are there any other software programs out there that will work with my unit? I'm not a great lover of sonic stage, I haven't used it many times but to me it isn't very user friendly. That is unless I'm not using it correctly.

    H4rry.

×
×
  • Create New...