Jump to content

Anyone Know Output Voltage Of Rh10?

Rate this topic


mcca6392

Recommended Posts

Hi all,

Just was curious if anyone could help me with this.

I've got an aux adapter for my aftermarket car stereo, and am planning on plugging in my RH10 through it for more widespread use of the Hi-MD. It precautions that anything I put through the RCA input jacks shouldn't have a voltage of more than 1 V - or if so, to turn the volume considerably down.

Just curious if anyone here knows what it is on the RH10. My manual only states it as being 5 mW + 5 mW @ 16 ohms. Is there any way (aside from taking a voltmeter to the output) to determine what this thing pushes, volt-wise?

Thanks for your help.

Link to comment
Share on other sites

You should be fine - the 'line' output voltage of other Sonys which have 5mW x 2 @ 16 ohm is 194mV into 10kOhms. This line out voltage would be equivalent to turning your RH10's volume right up to the maximum level, with EQ off... Even with EQ at max with the loudest music I doubt the RH10 would come anywhere near 1V...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...