Noam Posted April 8, 2006 Report Share Posted April 8, 2006 When I tape with the RH10 using the line in and putting the unit inside a synthetic suit pocket, one that makes me sweat, and/or when the weather is warm (above 55 F), the unit shuts off after 20-60 minutes, and if I use the hold function the signal just dies down to a thread on the WAV form. In other words, the line in is temperature sensitive. The mic in is no problemo. The temperature inside a suit pocket cannot be much above body temperature, yet garment changes and/or anything warmer than winter temperatures make it malfunction. Is this a defective unit or are all MZ-RH10 units temperature hypersensitive? Noam Quote Link to comment Share on other sites More sharing options...
Stuge Posted April 8, 2006 Report Share Posted April 8, 2006 Hey ,55F or 12.8Degree Celcius can`t be said warm IMO..I don`t have RH10 but to me there seems to be some problem with your unit . Quote Link to comment Share on other sites More sharing options...
SHion Posted April 8, 2006 Report Share Posted April 8, 2006 I'm starting to think there are too many faulty units from sony.I would try to get money back for a RH1 later.Or get a Sharp MD Quote Link to comment Share on other sites More sharing options...
AVITWeb Posted April 11, 2006 Report Share Posted April 11, 2006 Could also be that your levels are too high...Sounds A LOT like the amp cutting back to protect itself. Quote Link to comment Share on other sites More sharing options...
genghisbunny Posted April 11, 2006 Report Share Posted April 11, 2006 Strange - You may have a defective unit, as I've never had any heat-related issues with my RH10. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.