Jump to content

MZ-RH1 new Recording Problem (Hardware) ...unsolved

Rate this topic


rymannphilippe

Recommended Posts

Hello again

Please read my first topic how the problem started and what i fixed so far:  http://forums.sonyinsider.com/topic/29962-mz-rh1-recording-problem-hardware-solved/

After the recording mode worked like new, i have still recording problems.
I know my workbench isn't.... but i did it with all my patient i can get in to it.
So i think i didn't bend anything....

Reading normal disc = no problem
Reading Hi-MD = no problem
Writing normal disc = problem in the beginning = now normal
Writing Hi-MD = not working....

Normal disc not recorded, but after i push with some force on the upper head it worked.
So i forced bending the upper head a bit down, now the normal disc works.
format, record, move, pc and mp3 (still i believe a bit slower than my working model)

Hi-MD only plays.
But in the middle of my adventure a short period of time it worked. also from pc and mp3.
I just pushed the upper head (metal bending part) down with force.....
Sometimes it works and other times i tried 1 hour and not a single time it worked.

Does anybody have a solution?
Is the problem the lower head/lens part, is the problem the upper part (to strong, to lose)?
Is alignment needed or is the upper head not so important?
Do i have to edit the parameters in the service mode?

I hope you can see in the pictures how i push on the flex part to lower the upper head for testing.
(really sometimes it worked, sometimes not.....)

I know from opening my "good" RH1 the flex part in recording is flat on the metal part.
Mine is still a bit in the air but i feel a good amount of force the head is pushing down on the disc in record mode.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...