Jump to content

help!! Newby

Rate this topic


Guest Anonymous

Recommended Posts

Guest Anonymous

The cable you'll likely need is a dual-RCA to 3.5mm "Y-cable."

Make sure your recording levels are appropriate before you make the actual recording - too quiet and your recording will be quiet and/or muffled; too loud and there will be bad distortion.

Link to comment
Share on other sites

I believe the MZ-R500 has automatic volume levelling from the line-in, so to get the levels right just either use a line-out from your radio (if it has one) or turn the volume on it up all the way and turn any kind of bass boost or DSP off. As NRen2k5 said, if the recording is distorted, it's because the signal was too high...if that's the case, just slightly turn down the volume of your device's output. You'll probably want to do a short trial recording before you actually do your real recording just to make sure you're getting everything right.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...