dklaskowski

I've done some more experimenting. I have a second system with a built in Net-MD minidisc device and version 4.0 Sonic Stage software. I connected my MZ-RH1 to that system and tried to transfer the files and I run into the same problem. The first track does not transfer correctly as described above in the other posts. I tried to listen to the first track through the system -- it stops at the place were the transfer stops. Listening to the first track off-line through the MZ-RH1 with headphones works fine. Just the transfer is failing and just the first track. I recorded an orchestra rehearsal a few days ago and everything was fine with that, so I know it can work, but this recording of a lecture on Saturday is really being a problem.

I just made one more experiment: I added a track mark at 30 seconds in the first track and then tried to transfer the second track. It failed too, but not at 10 minutes and 20 seconds. BUT it failed at the same place as before in the recording. I know it is the same place because I can listen to the talking and hear that it is failing 10 minutes and 20 seconds from the start of the minidisc recording! I'm going to delete the 30 seconds at the beginning of the recording and try again... It still fails in the same place in the recording as before. 10 minutes and 20 seconds from the start of the original recording.

I can confirm the problem -- I recorded a meeting today and the all three tracks on the recording transferred to the computer okay, but the first track has a "gap" starting at 10 minutes and 20 seconds. The recording on the MZ-RH1 is fine -- just the recording on the computer is broken. I tried it again with my MZ-RH910 and same problem! I'm using SonicStage version 4.3 I've done this before and no problems, but I was using SonicStage version 3.4. I upgraded to 4.3 today, but I see one post that says 3.4 does the same thing.