Medra

Otherwise ... does anybody know on which pin to get the signals for eject and for loading ? I think I could ask the "eject"-switch and the switch on the loading-unit for the loading-signal, but there are other things ... I think (I don´t know because I got it for 10€ broken from ebay) that it puts out the MiniDisk when it is turned off ... and perhaps generate other Signals for ejecting the MD. What I plan is that if I do not succeed in repairing the problem I will put an Atmel AVR 90s... microcontroller in the player to catch the signals and to generate the Signal for the loading/ejection - Motor ;-) Now it works with an external Power supply, but this manual handling is not so good. Later it shall work in my Stereo ;-) Greetings, medra btw: Does anybody have experiance in adjusting the Laser power ? When CD-Players will not work you can adjust the decreased laser power by a potentiometer... In the service-menue there is a Menuepoint named Laser Power Adjustment. Does anybody have experience with it ? I have probs with an older MD (which is played by my Sharp portable without probs).

Hi, hmmm, that page I found before, but no repair info about my problem or a service manuel ... Btw: My first MiniDisk Recorder was (and is :grin: ) a Sharp MD MT15. Any other info how to get the Loading-Motor run ? Greetz medra

Hi, I have a problem with my Sony MDS-302. The motor for the loading-chassis does not work. The motor itselv is ok, it works if I use an external Power unit (I took 5V). Could it be possible to solve the problem with a "global system reset" ? And how to do this ? Or could there be a problem with the motor driver IC ? Very thanx for your help, I hope I will get it run ;-) Greetz, medra PS: Sorry for bad english, I am german