Raikmann

To fix ERROR EE. Enter into the Service mode if key are assigned randomly, connect remote, locate stop button on main unit, set hold to on position on main unit, while holding stop on the main unit press on the remote >> >> << << >> << >> << GP- GP-. Release all keys. Go to 1931 Adj Flg and set it to FF, than press pause key. Go to 2111 Pwr Off CC and press pause or turn off the power manually by removing battery. However you may have to perform some adjustments if player works unstabile (reading\recording takes a lot of time than ordinary). In this case you should set 1931 AdjFlg to 00 pause. Insert 60/74/80 min MD (if disc contains some recordings they will be destroyed!) Go to the 9224 MD1P&R CC press pause, unit will perform adjustment. Wait until MD1 OK is displayed. Than set the 1931 Adj Flg to FF, than press pause key. Turn off the power. I don't know how to adjust 1Gb Hi-MD section because i haven't 1 Gb disc yet. My unit is RH710. I hope that menu items is similar to rh10\rh910 There is only two unhappy, but fixable situations: Reassigned keys -> you can solder test mode land on maim pcb. you are in test mode. Unit fails to power on or there is a serious trouble on entering SM due to change hardware menu items -> you should short SCK and XHOLD pins of EEPROM and turn on the power, ERROR EE will be displayed, enter test mode un short sck xhold bridge and correct settings or clear nv memory and do that i had described previously on how to fix error ee. (from Russia, Moscow city) Good luck. Regrads. You can't kill player trough service mode. You always have way back. Sorry for my english.