saki Posted March 17, 2005 Report Share Posted March 17, 2005 OK, I recorded my first show last month and it turned out OK, the only problem was that I could not change the REC volume during the concert, even though the instruction manual says I can. I've tried it multiple times now and it seems that all I can do is set the regular volume initially using the dial before I push record. Am I doing something wrong? I don't think so, cause the manual is quite clear on what to do...I do it and it simply gives me a message that says "CANNOT SET". Any help is appreciated, cause tonight I am going to record another show.säki Quote Link to comment Share on other sites More sharing options...
jadesmar Posted March 17, 2005 Report Share Posted March 17, 2005 The recording level will always default to AGC when recording is stopped and will not allow you to set the level. Until recording begins.Record and pause will allow you to set the level before recording.Here are full steps to set volume maually during record.1. Press T.Mark/Rec(+>) and pause (||) at the same time.2. Hold Navi/Menu until Edit menu pops up.3. Using Wheel, scroll to REC set.4. Press Enter (>' Ent) in middle of wheel.5. Scroll down to RECVolume6. Press Enter (>' Ent) in middle of wheel.7. Scroll to Manual 8. Press Enter (>' Ent) in middle of wheel.9. Use wheel to select a recording volume.10. Press pause (||) to start recording.11. Wheel will now allow you to manually set recording level. Quote Link to comment Share on other sites More sharing options...
saki Posted March 18, 2005 Author Report Share Posted March 18, 2005 Thanks!!! Quote Link to comment Share on other sites More sharing options...
jadesmar Posted March 18, 2005 Report Share Posted March 18, 2005 How was the show? How is the recording? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.