biohegedus Posted December 11, 2005 Report Share Posted December 11, 2005 Hi,I have a Sony net md mz-nf810. I am using it to record life music.I would like to transfer the music to computer (D/A->A/D conversion).I have a very old CREATIV soundcard (at least the chip is Creative 5507?). It was working fine except that the card itself produce some noise. Other characteristics of this card: I can plug-in speakers w/o power plug (I am sorry I am not an electronics expert); it has 4 minijack out/in-let.Because of the noise produced by this card, I would like to replace it to a new soundcard. But I do not know which one should I choose. Several months ago I read somewhere at www.minidisc.org that I need some special sound card for this. ???I tried the built-in soundcard (on the motherboard), but I also tried a Soundblaster several months ago (I do not remember which one). But the problem is always: the output produced by the minidisc is very low for the input of the sound-card. I tired both the 'in' and 'mic' inputs; if I set the recording 'volume' to high, I can hear some music, but generaly everything is very silent...I would appriciate some advice for a good (and cheap) soundcard.Thanks in advance,Tamas Quote Link to comment Share on other sites More sharing options...
A440 Posted December 11, 2005 Report Share Posted December 11, 2005 (edited) You should be able to find this for $80 or less. http://www.m-audio.com/products/en_us/Transit-focus.htmlOr this will simply give you a line-in and mic-in input, which is all you need. http://www.amazon.com/gp/product/B00006BAL...glance&n=172282Is the music recorded on the disc itself very quiet? You have to figure out a way to get a louder recording: higher manual volume, a more sensitive microphone, etc. Or is your MD unit possibly a European model with limits on output volume? Search for "hack" in the forums. Edited December 11, 2005 by A440 Quote Link to comment Share on other sites More sharing options...
Christopher Posted December 11, 2005 Report Share Posted December 11, 2005 What about the Chaintech AV710? Cheap and powerful. Quote Link to comment Share on other sites More sharing options...
A440 Posted December 11, 2005 Report Share Posted December 11, 2005 AV-710 is internal, for a desktop. The others are outboard via USB. Quote Link to comment Share on other sites More sharing options...
biohegedus Posted December 11, 2005 Author Report Share Posted December 11, 2005 The music is rcorded on the disk at a good sound level. I can transfer it to the computer with the old sound card with good levels/qulatity (just the small noise sometimes caused by the card...).I will try one of them. Thanks.You should be able to find this for $80 or less. http://www.m-audio.com/products/en_us/Transit-focus.htmlOr this will simply give you a line-in and mic-in input, which is all you need. http://www.amazon.com/gp/product/B00006BAL...glance&n=172282Is the music recorded on the disc itself very quiet? You have to figure out a way to get a louder recording: higher manual volume, a more sensitive microphone, etc. Or is your MD unit possibly a European model with limits on output volume? Search for "hack" in the forums. Quote Link to comment Share on other sites More sharing options...
KrazyIvan Posted December 12, 2005 Report Share Posted December 12, 2005 Just a quick note. I had a Creative LAbs 5.1 card that I used all the time for dubbing. It did produce some noise and I found out it was RF interference from my PSU or my graphics card. I moved the card to the very furthestt slot at the bottom of the case and fabricated a RF shield out of sheet metal. It did reduce the noise I was getting in my recordings. I eventually switched to a Creative Extigy for the optical I/O's. Quote Link to comment Share on other sites More sharing options...
biohegedus Posted December 12, 2005 Author Report Share Posted December 12, 2005 Good idea, thanks! I did something similar yesterday :-)I moved the old 'noisy' card to another computer; so it works now great for me...Just a quick note. I had a Creative LAbs 5.1 card that I used all the time for dubbing. It did produce some noise and I found out it was RF interference from my PSU or my graphics card. I moved the card to the very furthestt slot at the bottom of the case and fabricated a RF shield out of sheet metal. It did reduce the noise I was getting in my recordings. I eventually switched to a Creative Extigy for the optical I/O's. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.