Nolonemo Posted November 5, 2007 Report Share Posted November 5, 2007 (edited) I have an Audio Technica AT-822 mic, it has 200 ohm unbalanced output to a 1/8" stereo mini plug. I want to run it into a Rolls MX34 mixer, which has 2 (mono) XLR inputs. Can anyone point me to an adapter to go from the stereo unbalanced to dual male XLR connectors?I've seen some 1/4" phono plug to XLR adapters, but these are sold as being used to pass a high-impedance signal (like a guitar pickup) to the XLR input. This is not my situation as the mic's output is not high impedance.Thanks,Nolo Edited November 6, 2007 by Nolonemo Quote Link to comment Share on other sites More sharing options...
ozpeter Posted November 6, 2007 Report Share Posted November 6, 2007 On the Naiant site at http://www.naiant.com/studiostore/adaptorcables.html there's some adapter cables listed, but not quite what you want - however, if you email Naiant they may perhaps be able to provide exactly what you need if you explain the requirement clearly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.