ym901s Posted February 4, 2010 Report Share Posted February 4, 2010 ... it still can't display Chinese characters properly (Note: I changed from code = "28" to "24") Why? Quote Link to comment Share on other sites More sharing options...
Avrin Posted February 4, 2010 Report Share Posted February 4, 2010 Do the characters display properly in SonicStage, when the unit is connected? Quote Link to comment Share on other sites More sharing options...
ym901s Posted February 4, 2010 Author Report Share Posted February 4, 2010 Do the characters display properly in SonicStage, when the unit is connected? Hi Avrin Yes, the Chinese characters are properly displayed in SonicStage. Btw I am using Microsoft's AppLocale in conjuction with SonicStage. Quote Link to comment Share on other sites More sharing options...
Avrin Posted February 4, 2010 Report Share Posted February 4, 2010 Try "25" instead of "24". Or even "05". Quote Link to comment Share on other sites More sharing options...
ym901s Posted February 5, 2010 Author Report Share Posted February 5, 2010 Try "25" instead of "24". Or even "05". Hi Avrin I tried but failed. Btw my FW is v1.10 My steps are as follows: 1. Enter "Test" mode 2. Enter "Manual" mode 3. Change Item 0113 from 28 to 24 / 25 /05 4. Item 0114 remains unchanged at 80 5. Press "Stop" x 5 to return to "Display check" mode 6. Remove & insert battery 7. Switch on DH10P Can you advise? Thanks in advance :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.