enito Posted December 2, 2012 Report Share Posted December 2, 2012 Hi, Any know a cross over or something for replace a microswitch coming from a SW PCB midisc, the reference number is: SWITCH, PUSH (1 KEY)(PACK OUT) 1-762-621-21 Thx for your time and help! Quote Link to comment Share on other sites More sharing options...
jim.hoggarth Posted December 3, 2012 Report Share Posted December 3, 2012 The only source for the specific part I know of is another drive unit from a faulty machine. As I think I said in another thread, you could do with getting hold of a scrap unit, especially as you may need a replacement write head too. Plenty to be found on eBay, just make sure the seller confirms they have not been in and attempted to repair. Jim PS - if physically broken, replace of course. But if just bad contacts, try some spray switch cleaner first. Quote Link to comment Share on other sites More sharing options...
enito Posted December 3, 2012 Author Report Share Posted December 3, 2012 Hi thx for reply, yep is broken, and this one is from eject, one of the troubles. The head writer i think is fixed, but now this micro switch is broken i try to repair.. thx Quote Link to comment Share on other sites More sharing options...
fuse Posted December 5, 2012 Report Share Posted December 5, 2012 Any know a cross over or something for replace a microswitch coming from a SW PCB midisc, the reference number is: SWITCH, PUSH (1 KEY)(PACK OUT) 1-762-621-21 attach photo Regards, Maciek Quote Link to comment Share on other sites More sharing options...
enito Posted January 17, 2013 Author Report Share Posted January 17, 2013 Hi, thx for the reply, i appreciate!! here the photos, you can see good one switch and the other broken, if you need more specific, let me know http://postimage.org/image/c8thjscd3/ http://postimage.org/image/4u45reqhj/ http://postimage.org/image/nnpyoeopj/ http://postimage.org/image/ora30d9cn/ Greets Quote Link to comment Share on other sites More sharing options...
fuse Posted January 25, 2013 Report Share Posted January 25, 2013 I found only a similar switch: ALPS SPVR110100 http://uk.mouser.com/ProductDetail/ALPS/SPVR110100/?qs=sGAEpiMZZMsT%2fJC6Zg5iLMggxk458NAyDwkhynBIPMI%3d ALPS SPVR120100 http://uk.mouser.com/ProductDetail/ALPS/SPVR120100/?qs=sGAEpiMZZMsT%2fJC6Zg5iLMggxk458NAyM8KXYyWQLUA%3d Panasonic ESE13V01A http://uk.farnell.com/panasonic/ese13v01a/switch-detect-spst-no/dp/2079637?Ntt=ESE13V01A ALPS SPVM110100 http://uk.mouser.com/ProductDetail/ALPS/SPVM110100/?qs=sGAEpiMZZMsT%2fJC6Zg5iLJMl1JxwrxfcLqLaTD4njLc%3d Panasonic ESE-16J001 http://www.newark.com/panasonic/ese-16j001/switch-detector-spst-no-250mn-10ma/dp/83T2677 Multicomp MCATE-1-V http://www.newark.com/multicomp/mcate-1-v/switch-detector-spst-1ma-40gf/dp/31M5577 Multicomp MCATE-2-V http://www.newark.com/multicomp/mcate-2-v/switch-detector-spst-1ma-40gf/dp/31M5578 Regards, Maciek Quote Link to comment Share on other sites More sharing options...
jim.hoggarth Posted January 25, 2013 Report Share Posted January 25, 2013 Hi, thx for the reply, i appreciate!! here the photos, you can see good one switch and the other broken, if you need more specific, let me know http://postimage.org/image/c8thjscd3/ http://postimage.org/image/4u45reqhj/ http://postimage.org/image/nnpyoeopj/ http://postimage.org/image/ora30d9cn/ Greets Hi again Enito I have just scrapped an MDM-3B drive unit for the parts, so I have a surplus switch board if you would like to purchase it. That way you can remove the switch you need and have a couple of spares for the future. I believe this only has one fault - the chuck-in switch S685 seems to stick and the contacts may be bad, resulting in no disc load when a disc is inserted in the drive. You can have it for the cost of posting to you, plus a few GBP to cover my time and effort. Where in the World are you? Jim Quote Link to comment Share on other sites More sharing options...
enito Posted February 7, 2013 Author Report Share Posted February 7, 2013 I found only a similar switch: ALPS SPVR110100 http://uk.mouser.com/ProductDetail/ALPS/SPVR110100/?qs=sGAEpiMZZMsT%2fJC6Zg5iLMggxk458NAyDwkhynBIPMI%3d ALPS SPVR120100 http://uk.mouser.com/ProductDetail/ALPS/SPVR120100/?qs=sGAEpiMZZMsT%2fJC6Zg5iLMggxk458NAyM8KXYyWQLUA%3d Panasonic ESE13V01A http://uk.farnell.com/panasonic/ese13v01a/switch-detect-spst-no/dp/2079637?Ntt=ESE13V01A ALPS SPVM110100 http://uk.mouser.com/ProductDetail/ALPS/SPVM110100/?qs=sGAEpiMZZMsT%2fJC6Zg5iLJMl1JxwrxfcLqLaTD4njLc%3d Panasonic ESE-16J001 http://www.newark.com/panasonic/ese-16j001/switch-detector-spst-no-250mn-10ma/dp/83T2677 Multicomp MCATE-1-V http://www.newark.com/multicomp/mcate-1-v/switch-detector-spst-1ma-40gf/dp/31M5577 Multicomp MCATE-2-V http://www.newark.com/multicomp/mcate-2-v/switch-detector-spst-1ma-40gf/dp/31M5578 Regards, Maciek I really i appreciate your help, !!!! thx a lot!! Hi again Enito I have just scrapped an MDM-3B drive unit for the parts, so I have a surplus switch board if you would like to purchase it. That way you can remove the switch you need and have a couple of spares for the future. I believe this only has one fault - the chuck-in switch S685 seems to stick and the contacts may be bad, resulting in no disc load when a disc is inserted in the drive. You can have it for the cost of posting to you, plus a few GBP to cover my time and effort. Where in the World are you? Jim Hi, thx for reply, ...sound goood, let me know price heh im from Chile (SouthAmerica) Greets! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.