Dominic Roche Posted December 28, 2007 Report Share Posted December 28, 2007 Guys: the volume slider on my NWA-3000 will only reduce the volume. Although the slider will move up, I cannot get it to increase the volume, at all.Any ideas, please?Thanks in advance. Quote Link to comment Share on other sites More sharing options...
0 Jaymark Posted March 4, 2008 Report Share Posted March 4, 2008 (edited) Hi I hope it's not too late but for anyone else in tHe similar situation, you need to do the following (it's not hard to do):1. Remove the silver disk that hides the rear casing screw2. Undo the screw and slide the back off (downwards motion towards the USB & charger socket).3. Undo the 4 screws holding the battery and disconnect it from the board.4. Undo the main board screws so that the circuit board becomes loose.5. Gently lift the board up but not so you damage it.Underneath you will see a black piece of moulded plastic and a large silver screw.6. Slacken of the screw and lift the armature of the plastic into the ridge of the volume slider button.7. tighten down the screw securely and then follow the steps 4 backwards.It's not difficult and it beats sending the device away or thrown in the bin.RegardsJason Edited March 4, 2008 by Jaymark Quote Link to comment Share on other sites More sharing options...
Question
Dominic Roche
Guys: the volume slider on my NWA-3000 will only reduce the volume. Although the slider will move up, I cannot get it to increase the volume, at all.
Any ideas, please?
Thanks in advance.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.