Taleteller Posted March 26, 2003 Report Share Posted March 26, 2003 Hello all Is anybody figured out the contorl port behind Yamaha MDX E300 rearpanel? I know it's use to connect to PianoGraft serise reciever, when you want to use systems IR remote. But... I would like to control it hardwired. So does anybody know, what the Reciever does to those IR commands before it sends those hardwired to MD (and deck)? I have tried to learn IR codes to control that by putting one xantech emitter to amplifiers control out, but it wont be controlled by PC or with IR receiver connected to the MD (or deck) control in jack. Because the amplifier can control the Deck, so it should be possible for all? with the same commands. All I need to know, what is the thing that the amplifiers receiver do to those IR commands and emulate them? I'll first, of course, asked from Yamaha, but they said, taht "sorry, we won't give info for you. just figure it out yourself". We'll I'm dump as an boot, so anybody??? Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted March 28, 2003 Report Share Posted March 28, 2003 I hafe figured this with serial analyser, and theres seem to be HEX data. But if I send this same HEXdata I record from controloutput to the MD, it won't do anything. Any ideas? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.