Guest Anonymous Posted June 9, 2003 Report Share Posted June 9, 2003 I was recording files and the lo-batt indicator came on. I was connected to external AC power at 4.6 volts when this occured. I replaced the recargable battries with dry batteries and unplugged from power source, but still have the same problem. Any solutions out there besides sending to Sony for $109. flat rate? Quote Link to comment Share on other sites More sharing options...
jango2 Posted January 22, 2004 Report Share Posted January 22, 2004 Did you sneak into test mode and alter any of the Hex values under "Power"? Well if u did u'd need a service manual and a multimeter to restore the original values. I'm trying to restore a MZ-R37 for the last two days with no audio only beeps. However when i get into test mode the 1 KHz tone is audible.During playback i get no DATD signal from ATRAC CXD2652AR pin 24. However this waveform is available during test mode step 11. What i need is for some1 to give me a list of working hex values coz i cant find a service manual for the unit. RJ. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.