markcoop Posted October 5, 2003 Report Share Posted October 5, 2003 HELP!!! I've just found my Sony MZN1 MD player at the bottom of my bag, immersed in a pool of Coke! It's gone right into the player throughout. At first it was just completely blank and wouldn't do anything, however I’ve allowed it to dry out overnight and with the aid of a hairdryer. Now it is showing signs of life, yet it is finding it hard to read discs and won't play anything... Is this the end of my poor little MD or can some one give me reassuring words of how to fix this PLEASE? Quote Link to comment Share on other sites More sharing options...
Christopher Posted October 5, 2003 Report Share Posted October 5, 2003 It's done. :/ Quote Link to comment Share on other sites More sharing options...
porio Posted October 7, 2003 Report Share Posted October 7, 2003 Only if you think you've nothing else to do: try inmersing it in distilled water and then let it dry again. Good luck Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted November 2, 2003 Report Share Posted November 2, 2003 Carefully clean the laser. and the laser track with some sort of penetrating lubricant to dissolve the gunk)eg wd 40 ) butg be careful not toget much on the lens because it might be hard to get off. Quote Link to comment Share on other sites More sharing options...
mojo1287 Posted December 26, 2003 Report Share Posted December 26, 2003 If you can get access to an ultrasonic PCB cleaner (in the uk, try www.irwebonline.com , it's a mobile phone repair site but i think they do them, and if not in the uk you can see what they are). The screen will probably have to be replaced but the pcb cleaner SHOULD get it to work again. Quote Link to comment Share on other sites More sharing options...
keebla Posted January 3, 2004 Report Share Posted January 3, 2004 I suggest taking it apart.Just ebough to get to the lens.I f you take it apart.Get some rubbing alcohol and a Q-Tip(clean) and dip moistend the q-tip with a little bit of alcohol.Clean the lens with up and down motions.If you have any electronic cleaner,yoou could spray that in there.It wouldn't hurt.Dry off the the lens with another clean q-tip.Put it back together and see if anything happens.Good Luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.