mz-n10 completely frozen

[m4tt3h]

hi, everything was fine until this morning...

i was recording a track from my pc onto md via sonicstage. when the track was done the md was saying datasave for aaagess so i just pulled the usb cord out and the md froze, all i could see on the display was lp2, the battery status and the disk not spinning logo. the door would not open or anything. after a while the unit turned its self off and i turned it back on and managed to download a whole album, only to notice the titles were in jargon and jumbled. so i plugged the md back into the computer and renamed the tracks. when i unplugged the md from the pc again the md still had pc--md displayed on it and was totally frozen. it wont respond to any button puches and the door wont open. its been like this for about an hour now and i cant get the battery out cus i dont have a screwdriver small enough. should i seek out the waranty or can it be sorted??

many thanx

[aeriyn]

Hi there.

Try switching the Built-In Battery switch (on the back of the recorder) to the off position, wait a few seconds, then switch it back on.

This is the equivalent of removing the battery.

Tell me if it works. :happy:

[m4tt3h]

hi that worked thanx

[aeriyn]

Glad to help. Welcome to the MDCF, by the way. :happy:

When you transfer tracks to the N10 via NetMD, make sure the unit is in the charge stand/USB dock, and when you're finished making a disc, remember to press the "STOP" button on the player so it'll finish up with its TOC editing.

When it goes from "TOC Edit" to "PC->MD", then it should be okay to remove the unit or remove the disc and transfer tracks to a new one.