Jump to content

Battery charging!

Rate this topic


hutcheezsad2

Recommended Posts

Just got the MZ-NH700 and i had a MZ-R55 before that - same problem on both.

On both machines u start it charging by pressing "Stop", so when i plug in and its says "Charging" i leave it - naturally, then i come back in a few hours and the screen is blank - its finished chargin yeh? - Not so when i press "stop" again it says "Charging" again - what the hell?!

When does it stop charging - as in how do u know if the battery is full?

Link to comment
Share on other sites

When the screen turns off, it should be charged.

Pushing stop again will try add some juice to the battery as the rechargable cell can never be fully charged. So the unit will always try and give it some juice.

I suggest against hitting the charge button after you've charged it up as this could lead to over charging and killing your battery.

Link to comment
Share on other sites

Nickel Metal-Hydride batteries are not "smart" batteries like Lithium-Ions are. They charge for a specified amount of time as determined by the device charging them (either a standalone battery charger or an MD unit itself). The unit actually doesn't "know" when the battery is fully charged. This is why it's bad to put a NiMH in the charger when it's not completely drained or mostly drained; the battery becomes slightly overcharged and a memory effect shows up.

Link to comment
Share on other sites

Yes, NIMH batteries are not smart batteries like some Lithium but good chargers don't use time to determine when charging is complete. The good charges like all the fast chargers use charging IC that are based on delta V and delta T (voltage difference over time and temperature difference over time.) Temperature is not always practical for separate cells so they rely on the voltage change over time. Battery packs (like laptops use) contain thermistors that are feed to the charging IC to provide the delta T input.

Trying to charge a fully charged battery will slowly over charge it. But since the IC is able to detect this condition the charge should stop in a few minutes. As long as the battery is completely cooled down before attempting to recharge and you don't do attempt this like 20 times in a row no damage should be done.

NIMH batteries don't need to be drained completely to avoid memory effect. You just have to fully cycle the battery once every 30-60-days and any temporary capacity loss will be undone. Always draining a battery before charging (like letting a disc play and not listening to it) will prematurely wear out your battery.

Nickel Metal-Hydride batteries are not "smart" batteries like Lithium-Ions are. They charge for a specified amount of time as determined by the device charging them (either a standalone battery charger or an MD unit itself). The unit actually doesn't "know" when the battery is fully charged. This is why it's bad to put a NiMH in the charger when it's not completely drained or mostly drained; the battery becomes slightly overcharged and a memory effect shows up.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...