Jump to content

R_V

Members
  • Posts

    27
  • Joined

  • Last visited

Everything posted by R_V

  1. Not sure what/how it happened, I simply removed and reinserted those ribbons a couple of times and voilà, it works ! Thank you.
  2. Thanks for clearing that up. Do they look like twist ties? Do you happen to have pics of what they look like and where they are located, please?
  3. I followed the “proposed methodology” (except the odometers). I spent two days double test recording on both MD decks and reported all back.what did I miss? P.S. thanks for those links. I hadn’t seen all before. Have lots to read tomorrow, cheers
  4. On my first post, indeed had those errors. Later on, on a later post, I thought I made clear I no longer have those errors, just skips/skids , I said.
  5. I don't get those errors... Just skips/skids
  6. So you're saying by pulling the ribbon from the socket twice, is enough to remove oxidation, I don't understand ?
  7. How's this done, with a laser reader? If so, I don't know anyone who has one. Wouldn't this affect both playback and recording? Both MD decks play (my old recorded MD discs) very, well. How easy is to replace/buy and ship new ribbons? What about the lasers, easy to find/buy?? ...two MD decks, have exactly the same issue!? How likely is this?
  8. Never really had that much recording, a wee bit of play, maybe. From '97 and still like new (deck A). I had my first C13 error today, nothing major. Wiped all songs and recorded again. (deck B Haven't read about odometers, yet. NGY warning put me off...
  9. For many years, I used to say that too. It travelled w/ me from EU, to Australia, then UK for many years and back to AUS for almost 10, never skipped a bit ! Then last 6 months this issue occurred... bought a second 520 last week and same issue... Do they have an end of life, similar to DSLRs (after 100.000 clicks, the shutter dies) ? I also read somewhere about misaligned heads (2x on each deck), but not on my two decks, I wouldn't think?
  10. (Ignore this above, it must have been a lucky attempt?) So spent the last 2 or so days, testing all different scenarios… recording between the two JE520 MD decks using different RCA cables, and different blank MD discs, and reversed the order of MD deck recording, also test recording from 3 different audio sources (into each MD deck) directly connected with different RCA cables, (no Amp). Also tried recording from the CD deck, via different Toslink cables, into each MD deck, using different blank MD discs, and no improvement! Not only I used different audio sources, I also used different CDs (original and CD-R), different Playlists and vinyl records, MD discs (recorded) etc., playing from those 3-4 audio sources (CD deck, Phono, Mac and MD deck A, or B . I also tried all the above using REC SYNC and normal REC (where you press REC and pause, manually) and flicked the OPT. COAX, ANALOG. selector couple of times before each recording. All showing correctly on each of the JE520 screens. All I get is bloody skips and skids, #$@&%*! When I get skips (similar to a vinyl record) is while recording, and I notice extra tracks being created for each skip on the same song… When I get skids, it’s only noticeable at playback and it freezes (both the song and timer on JE520 screens) for 1-2 secs. and then continues to play again until next skid and so on. I cannot believe two separate MD decks, have exactly the same issue, no recording!? Now I have 2 MD decks for playback only #$@&%*!
  11. Not a bad point... it had also crossed my mind when the issue started, way before I decide to post the issue here and way before I found and bought new (sealed) blank MDs... By the time I found this forum and 'popped the question' I had already made all sorts of recording tests, from a CD-R was one of them, but it didn't help has I had also tried CD-WR, and 'normal' studio and also from my Record player and my Apple Mac, from own my recorded MD disc etc. etc. and the issue was still there, so it made me think it was a dodgy blank MD, not the audio source(s). Cheers P.S. I don't want this to go off topic, neither I want to argue long about this; but doesn't my recorded CDs (recorded through iTunes) get rid of SCMS? I never had a problem recording from those (iTune's recorded CDs) and neither my friends ever had any issues copying those recorded CDs, into their Mac/PC and then into their iPod/iPhones etc., regardless if they were iTunes purchased songs or imported into my iTunes library, from another source...
  12. I can’t ATM, but they’re the same as your bottom 2 pics, w/ Opt, Coax , Analog.
  13. Tried so many different original and recorded CDs, different audio sources, different playlists from my Apple Mac, RCA, Toslink cables etc. etc. No difference whatsoever. These can be very, very random and from any audio source, or RCA, Toslink etc. Skips are always random and hardly ever on the same song (i.e. if I test record from the same CD twice).
  14. Both my MD decks are from EU, as pict above. I don’t have/use Coax cable.
  15. Yes all good messages on screen.
  16. That's what I thought... I read about it sometime ago. Am I missing something NGY / kgallen ?
  17. Tested recording between both decks with RCA cables - all good, no skips, no issues. And have only been able to test recording w/ 1 Toslink cable (alternating IN/OUT), and it says: "Cannot Copy", on either MD decks. I only have recorded MD discs. And they were all recorded from a digital source years ago. * The initial recording issue, was, while recording both via RCA, and Toslink. Doesn't make sense to me, as the source devices are different. 2 RCA and 1 Toslink (direct from CD deck). If it was device issue, it would only affect either de device source using Toslink, or the devices connected via RCA to the AMP... but not both types of connection, correct? † If it was cabling, I would have the same (skipping) issue while recording between decks, correct? But I didn't! Below is my basic setup, what can go wrong? A bunch of RCA/TOSLINK/SPEAKER wires touching one another and having interference?
  18. I have no idea where to find this? Nothing on the Operating Instructions either? I only have Setup (with 15 different submenus)
  19. Will do, that's the only thing I haven't tested yet... will report ASAP Cheers
  20. As mentioned before, there are 3 separate source devices and would the same issues happen on both MD decks? I am also using new cables (Toslink and RCAs), new MDs, and a second JE520 just purchased...
  21. What are you referring to, the level recorder meter? If so, their fine.
  22. I misunderstood you, I thought you were referring to light from the Toslink cable! Nonetheless, it's hard to believe these issue would be on both MD decks!?
  23. Thank you all for your responses So after testing all again: DIGITAL/Toslink: I still do have errors on screen saying DIN UNLOCK every now and then, but only when recording from CD (via Toslink cable) and on both MD decks. Both JE520 decks show normal graphic level recorder meter. (going up or down as a song changes). It just stops for 1-2 secs or so (and no sound), while showing DIN UNLOCK on the screen. Everytime it flashes DIN UNLOCK, it also creates another track, while still recording the same song. So I may be only recording the third song, but if it has shown 10x DIN UNLOCK, it also creates the same amount of tracks, on the MD disc. This happens on both MD decks. (MD deck A, which I owned for many years, seem to have more DIN UNLOCK errors than MD deck B, which I purchased recently secondhand, to test my recordings, and has fewer DIN UNLOCK errors) RCA Then, when recording from either PHOMO, or my Mac (via RCA cables) it simply skips/skids throughout any song, randomly. Again, on both MD decks. These two music sources are both RCA connected, to AMP, then AMP to MD deck, so there shouldn’t be “insufficient laser power”. If the cables were the issue, I wouldn't be able to record anything, correct? But sometimes I do, no skips, but it's like lottery... The only thing I noticed, is the AMP’s RCA connectors/ports are starting to oxidise a bit… but this should not effect the digital recording from CD (via Toslink cable). And similarly, both MD decks would not have the same issue with the Toslink port? Double checked all cable connections again, used brand new (sealed) and other semi-new, blank (unsealed MDs) for all tests above, Don't know what else to test, or report. Thank you again.
×
×
  • Create New...