sokomind
Members-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Everything posted by sokomind
-
still has anybody had seen anything about it?
-
I'm studying mechanical not electronical but what I tried to tell is that "The bottom line is the batteries are pretty much the same and they're safe to use" as you say. I look my 650 battery manifacturer's site and as skropp said it has "These are: shut-down separator (for overtemperature), tear-away tab (for internal pressure), vent (pressure relief), thermal interrupt (overcurrent/overcharging)". And One more thing I don't think HD5 calculates and decides charching operations as it has two poles (no way to batteries 3rd terminal).
-
Possible thought of coarse. "too high charging currents" I understand high ampers with that sentences. USB must give about 200mAh, charges 6-7 hours, AC Dc Adaptors give 450-550mAh, charges 2-3 hours. there is adaptors charging ni-mh 2600 AA batteries in an hour. that means That they have 2600mAh internal AC/DC. It is called rapidcharge and not advised doing always. only in emergancy. it decreases life time of battery. Volt differences makes current. Lets think about charging circuit together with adaptor is suitable for 3.7 volt and we put inside a 3.6v battery. Is 3.6 volt battery overcharged? absolutly NO. li ion batteries have a chip of resistance and thermostat prevent from overcharging. I measure full charged orginal battery volts 4.20V and my second 650 battrey 4.19V means they are nearer and same then expected as 3.6 and 3.7 I bought second battery because I do not want to use orginal while transferring tracks to my HD5. Because all type of batteries will loose power when operating and charging at the same time due to two way currency. Also charging unit is not complecated in HD5, ones in mobile phones is what I see.
-
sade.duo bought both battery and charger on e-bay. He can charge two batteries at the same time. Also he can easily charge orginal 880 and BST-33 inside HD5. Am I right, sade.duo? For me, I charge my 650 and orginal 880 inside the player. they are like two AA batteries with 1800mAh and 2600mAh. Only make and capacities are different.
-
(EDITTED) I have read 29 page but i don't remember such a bug mentioned: For example in device we have 300 songs. suppose deleting 10 songs from an album. 290 songs must remain. in winamp library album and artist boxes show 290 songs to all songs. again suppose that we put 5 songs to device. 291/300 292 /300 to 295/300 is shown below before "all done". I hope I could tell the small and unimportant problem. By the way I had been trying mp3 id3tagger programmes (about 20 proggrammes I tried). I found 3 of them useful which I do not know it is right to give names of them. This is not to add reviews with pictures but if anybody tells me where I can add a post, I can write how to make perfect tags suitable. Please lighten me with PM.
-
Thankfully to god and otiasj; ml_sony supports mp3 files that have only id3tag 1 (1.1), only 2(2.3) and also together 1 and 2 but fully tagged I have to mention again. (But I also try to use only one of them like you, cautious! I have not tried what happens if v1 and v2 differs both in/on/at ml_sony and VMT-MP3FM-SS and even fear of trying .) sony programs assign 'unknown' or something else (no artist, no genre). Not to crash with empty tagged files, ml_sony can select two ways: 1) Assigning what MP3FM does like unknown tagging or freely assignin anything. 2) It must be more difficult to code this but i prefer that (my dear otiasj:) )ml_sony can warn us with a message: 'Files you are trying to send Sony has no "artist" information.' (or which were empty.) And asking what to behave. EDIT: v1 id3tags have 30 character-long capacity. a song tagged v2: Alcohol Fueled Brewtality (Live) v1: Alcohol Fueled Brewtality (Liv ml_sony use v2. so i understood v2 has priority as usual. Another experiment; I thouht if v2 has priority, what happens on existing fully tagged v1 and half tagged v2: track numbers: v1 artist: v1 v2 and same album v1 v2 and same genre v1 exist. No crash. again another question. Did ml_sony take existing v2 and empty datas from v1 or when it sees empty datas of v2 did it take all from v1? v1 and v2 track number are 2 // genre are acid jazz v1 and v2 artist Brooklyn Funk Essentials Featuring Laço Tayfa v1 track name is Istanbul Twilight. no v2 name testing data is that v1 album "In The BuzzBag" /// v2 "In The Buzbağ" result: no crash, track number 2; name Istanbul Twilight (must be taken from v1); Album is In The Buzbağ (must be taken from v2 not with 'ğ')
-
I bought a non original battery alike bst33: neopower 3.6V 650mAh. It fits and works. If orginal battery longs 30 hours, that one must long about 22 hours. It is only 8 TL (Turkish Lira s) about 5.5$. One year warranty. The important thing is not to forget making an outgrowt to this battery so that you can pull back it from inside the HD5. Otherwise ... bst33 or alike batteries are compatible with Sony Ericsson Z610, K790, W300i, Z530i, V800, V800i, Z800. Telling to the salesman these models can be helpful.
-
Not to use SS: it is even impossible about 3000mHz PCs, beyond impossible P3 800 of mine. Otherwise it is a good programme Accept making an upgrade DB transfering song by song. This nearly twice the time. Not to use Vaio M: There is no library lister. You can not see what is inside your player. Otherwise a bit faster than SS still song by song upgrade. Not to use MP3FM: Library listed is not alike in the device menu it is folderized . Still upgrading DB song by song. To use ml_sony: The fastest Because after drag an drop action, it copies mp3s as 10XXXXXX.oma in 10F0X folder and make upgrade at the last. while Keygen wizard setup, ml_sony can download 5000 songs about 10 mins and upgrade about 30 seconds. But MP3FM download a single 16kb song immadiately but upgrade every song in 4 seconds. I can not think download 5000songs in 6 hours with MP3FM. List of library is also good in a way. not to use ml_sony: It crashes all the time. so i have not used it but i can not digest sony programmes. I always try to find out why it crashes. (about 2 months) It was about tags. it crashes with mp3 with no tags even one of artist, album, title, track number, genre is missing. While ml_sony do not add empty tag datas, it needs perfectly editted tags. I was afraid to use it. But i realised that while i was writting this post that wrongness was with me cause I had thouht i edit id3tags perfectly but i had been forgetting genres. I editted one album's genre that make crash winamp and transferring happened now. While I do not use genres I skip editting them. I think a big percentage of my problem were solved. ml_sony does not fill empty tags. in a cleared Debug_ml_sony.log file there is only "sending D:\Venom\1997 From Heaven To The Unknown\CD1\01 - Welcome to hell.mp3 to G:\OMGAUDIO\10F00\10000084.OMA" written. sometimes a header of file error is written. I only ask now is it releated to winamp pmp sdk that not filling empty tags (all sony programs do). I don't thing so. I have been waitin a new ml_sony for a long time so long so I am posting at last. By the way thanks; otiasj, Juppe and Auke. would you need xxxx_appcompat.txt (win error log when winamp crashes)? Sorry about such silly langıage.
-
ipodscrobler must be called also yamipod.
-
HD5 can not display unicode characters. I mean and need displaying Turkish characters: Characters which most devices can display: Ç ç Ö ö Ü ü Characters which are not included even German/Spanish....etc Ş ş İ ı Ğ ğ IS there any way?
-
Europeans: Boost the volume of the NW-HD# series.
sokomind replied to Christopher's question in Audio
it can be the speed of kinda cpu of nw-hd. dangerous stuff. Do not forget service menu is dangerous. (İnsanın başına ne gelirse) Ya meraktan, Ya yarraktan! Turkish saying. PM for translation. -
If you calculate R (ohm) from V=i r -it seems absolutly; you are in a big wrongness.900 mAh is not the amper rate in a circuit. It is mA hour and means if you suck 900 mA from the battery it ends up in an hour so 900mA x 1 hour. It is not curreny, it is capacity. as amper is elctrons getting through over a time period and if you multiply it with time, you get electron capacity of battery again. If fully charged 880Mah battery longs 20 hours, average suck of amper of hd5 is 44mili amper over an hour. 900mAh battery would probably long a bit more 20 hours at the same usage. (900mA*h/ (44mA)= 20h 27mins) If can be produced, 1500mAh battery longs 34,1 hours. "A difference of 20 miliampere which is quite a lot for ur delicate or sensitive items & it may simple blow ur device easily." is absolutly wrong hd5 won't suck 64 even 664 miliamper for my examples. Haven't you use AA AAA ni-cd or ni-mh batteries ever? for example if we use two 600mAh with a camera we can only shot 4 picture, 20 picture 1800mAh, 40picture 2600mAh. but camera is not broken down. 3.6 and the 3.7 volt is not important. a fully charged battery voltage is near 4,2V and empty one is 3,6V. Under 3,6 or 3,7 phones or players tell empty battery sign. It is the reason appearing of "charging" sign comes late with empty (quiet under 3,6v) batteries. quick proof: http://www.24.se/pub_images/medium/v800_897.jpg Not org. battery 3.7V not 3.6 for v800 http://www.mytrendyphone.dk/images/425126.jpg 3.7v but not 900mAh battery for v800. they work on v800 different with 3,6 volt 900mAh Thanks sade.duo . In Türkiye A battery of ipod is 110$, of hd 75$. orginal phone batteries are bw 20-35$
-
My question is different but can be same titled post so I continue from here. Maybe Li ion batteries can be charged any time but all batteries lose performance while performing and being charged at the same time. Like calling while charging with a mobile phone, adding songs needs battery usage and (while performing mp3 addition) it is also charged. I do not want charge while connecting to PC-adding songs. I have Motorola mpx200 and it uses same usb cable (universal mini usb cable). I cover a pin inside the jack getting in phone with a piece of paper. It is same with covering a pin pluging in pc usb port. (that pin is red covered cable of power). My mpx not charged while sync' . But it is not worked with NW-HD. After a few covereage of different pins, I have seen that any 3 pins open is sufficent to transfer data and electrons like parallel circuits. QUESTION: IS IT A WAY to disable usb charge while connecting our walkmans to PC.