jamil

Hi Caution! Do not select lineout from useful menu with low impedance headphones plugged in as this could damage the output stage and your headphones I will not take any responsibility for any damage done while doing or after the 5mW mod is carried out on the N10 regards Jamil :!:

Hi i have just moded my N10 to give full 5mW output just shortout or replace with 1 ohm R112 and R212 you will need a fine tip soldering iron and magnifying glass there is provision on the pcb to short these components see service manual be carefull and have fun jamil

Hi The sound on the N10 is a big issue it sounds flat having used a MZN707 with 5mw output was disapointed when I tried the N10. The 910 has a limit on the custom equ settings volume will not go above 24 for this model on these settings. Looked at the diagram for the N10 IC302 a AN17020-VB made by Panasonic could not find any data for this IC The mod you are talking about in MZ-NF810 manual uses a diffrent sound output driver to the N10 if anybody knows how to change the gain or has the non Eorupean service manual for the N10 or has reference on IC302 could you please post here Thank You :?: WE DONT WANT IT LOUD BUT IT IS NICE TO KNOW YOU CAN