TimJim

Has anyone encountered errors when converting multiple tracks with the wav conversion tool. I have found 4-5 tracks out of 30 being converted from a 80 min disk in HI-SP format fail to fully convert and stall the conversion tool. Attempts to then convert a single track fail at 99% typically - leaving an almost converted track in wav format with the end clipped off. This was with sonic stage 2.2 doing the initial transfer. The first time this happened a reboot seemed to fix it. Subsequently rebooting has not worked. Nor has repeating the transfer. Neither has reinstalling the conversion tool. Intermittent and frustrating. Any thoughts would be appreciated.

I have had the same buzzing on the MZ-NH1 when using mains while recording from a mic - with suppressors on. I have found that 5 NiMH rechargable AA size in a battery pack (5 because they are 1.2 v and the 4.8v from 4 gave erratic service) plugged into the charging station worked very well - Maplin (maplin.co.uk) in the UK sells battery holders for 6 and dummy batteries to take up the sixth position and the power supply plug etc. With 2300mAh AA cells available there is a lot of juice for hours of buzz free-recording...