lyceemoliere Posted January 29, 2005 Report Share Posted January 29, 2005 (edited) I recorded one hi md disc using cd---> HIMD with simple burner and the capacity seemed appropriate (i.e. about 40 cds seemed to fit on the disc). Then I tried to burn another disc and although I could not detect any changes in setting etc and the md side of the simple burner said "HI MD" and the transfer rate seemed to be the same, this time only 12 discs seemed to fit. What did I do wrong?As I mull this over, am wondering whether this could be the problem: I originally recorded on this particular disc in md mode- then erased all the tracks. Does one need to reformat the disc- if so, how do I do this? Edited January 29, 2005 by lyceemoliere Quote Link to comment Share on other sites More sharing options...
ROMBUSTERS Posted January 29, 2005 Report Share Posted January 29, 2005 yes. through Simple Burner you click Config and then disc type or something, sleect HiMD and click Format Quote Link to comment Share on other sites More sharing options...
Justin42 Posted January 29, 2005 Report Share Posted January 29, 2005 Sounds like you inititally recorded with the transfer mode in HiLP and then the second time it switched to HiSP. Check the little box in the middle of the SimpleBurner window, depending on your version you can get PCM/HiSP/HiLP/48kbps. (you may or may not see some of them). HiSP will get about 10-12 albums per HiMD disc, HiLP will get closer to 40. Quote Link to comment Share on other sites More sharing options...
lyceemoliere Posted January 29, 2005 Author Report Share Posted January 29, 2005 Sounds like you inititally recorded with the transfer mode in HiLP and then the second time it switched to HiSP. Check the little box in the middle of the SimpleBurner window, depending on your version you can get PCM/HiSP/HiLP/48kbps. (you may or may not see some of them). HiSP will get about 10-12 albums per HiMD disc, HiLP will get closer to 40.←I thought I recorded both with 48kbps actually. Which setting is best? Quote Link to comment Share on other sites More sharing options...
lyceemoliere Posted January 29, 2005 Author Report Share Posted January 29, 2005 yes. through Simple Burner you click Config and then disc type or something, sleect HiMD and click Format←I didnt format the first disc- it just recorded well all on its own. But, you think i need to format the second disc again so it will work with HIMD capacity? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.