Jump to content

Sony Mz-n710 Service Mode Problem

Rate this topic


discofever

Recommended Posts

I don't know where this should go, so please feel free to move it.

I foolishly got into service mode on my MD, and messed with the settings. Now all my buttons are messed up.

Pressing play goes forward song, stop goes back, flicking record plays tracks etcetc.

Is there anyway this can be fixed? Even if I take it to an authorised repairer?

Link to comment
Share on other sites

I don't know where this should go, so please feel free to move it.

I foolishly got into service mode on my MD, and messed with the settings. Now all my buttons are messed up.

Pressing play goes forward song, stop goes back, flicking record plays tracks etcetc.

Is there anyway this can be fixed? Even if I take it to an authorised repairer?

Welcome to MDCF!

You could:

1) Purchase or locate N710's service manual so that you could try and "reset" the unit to its initial settings. *drop me a pm and I will provide you with a reputable service manual dealer.

or

2) Contact Sony Service and Repair: click here and initiate the necessary repair procedure accordingly.

Link to comment
Share on other sites

Welcome to MDCF!

Thanks!!

1) Purchase or locate N710's service manual so that you could try and "reset" the unit to its initial settings. *drop me a pm and I will provide you with a reputable service manual dealer.

There's a chance that this won't work though, right?

2) Contact Sony Service and Repair: click here and initiate the necessary repair procedure accordingly.

I tried the Australian one of this (I guess I should have said where i was from in my first post) and have an address, and have got a couple of places that I'll check out, thanks!

Link to comment
Share on other sites

sadly it may cost more to fix given sony australia's high servicing prices than a replacment unit would cost.

yeah, I had a feeling that was the case.

I obtained a service manual for a N707 last night, and tried the codes for that, with no luck. They were the same codes I got into it in the first place.

So I guess it's off to see the repair man :/

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...