Jump to content

Uploading tracks that were recodrded with Simple Burner

Rate this topic


bertnurney

Recommended Posts

Hey lads,

Can i upload songs that were burned using simple burner? It keeps saying 'this file originated from another computer...'

Even if it was the same computer i used for the simple burner part

any ideas?

No. Only tracks that have been recorded on the unit itself either optically or via line / mic in can be uploaded.

Link to comment
Share on other sites

Have you tried the "scan HI-MD" button (bottom left - next to the find buttons) on HIMDRenderer 0.5

This gets the Atrac data from a HI-MD disc, creates an OMA file from that data and then can either copy the OMA to a desired location or convert that OMA into WAV/OGG/MP3/FLAC

Its a bit experimental though, although there is no risk of data loss. It will only work for audio tracks that originated from your PC. It wont work for recorded stuff

Link to comment
Share on other sites

Have you tried the "scan HI-MD" button (bottom left - next to the find buttons) on HIMDRenderer 0.5

This gets the Atrac data from a HI-MD disc, creates an OMA file from that data and then can either copy the OMA to a desired location or convert that OMA into WAV/OGG/MP3/FLAC

Its a bit experimental though, although there is no risk of data loss. It will only work for audio tracks that originated from your PC. It wont work for recorded stuff

Cheers Marc,

I'll give it a go. A lot of my friends were looking for some of the music on my Hi-MDs. And i always use Simple burner to put them on my mds. Would be very handy to be able to upload them. I'll let ya know how it goes.

Link to comment
Share on other sites

Marc please could you clarify: If the tracks were recorded on the computer and then downloaded to MD and then subsequently deleted off the computer, would the MD recognise the fact that they originated from that particular computer?

If they where recorded on that computer (WITH drm), and then transferred, you could copy them again to your harddisk, because the drm information is still in your library.

If you recorded them without DRM (Sonicstage 3.2 or higher) OR you used Simpleburner, the drm-information is added during the upload of the files, and so this drm info doesn't exist in your library. You won't be able to play back these tracks when you copy them to your computer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...