HEELLP NOT recording

[rick brown]

I am using a mz-m10. I have only recorded 4 sessions with it using the supplied mic. I am exporting to a mac so I am recording in PCM.

Previous sessions worked great.

Now, it won't record at all. I've checked all my settings and they appear to be correct. Battery is charged, Hi-MD is displayed, little balck square is there, PCM selected.

I insert a blank disc, it displays the title screen which of course is empty.

I hold the jog dial and press the record button and all it does is display "Blank Disc" and doesn't start recording.

If I press the reocrd buttons again it displays "no track"

Same issue occurs whether I am using a Hi-MD or MD 80 disc

Any ideas????

Thanks

Rick

[The Low Volta]

you could always try to remove all power sources (including batteries) for a minute, then reinserting the battery and try again (this will reset the machine)

also check whether the discs' write protection tab is on (though I doubt that)

[rick brown]

Thanks anyway, but mystery solved.

SOMEbody was reversing the button 2 step. I had been holding down the jog wheel before hitting the record button AND WE ALL KNOW you hold down the record button before hitting the jog wheel.

[The Low Volta]

something like that had come in mind actually... but as I only own the NH900 and RH1 which both use different rec-triggers (a slider) I was too uncertain about the RH10's procedure to say something about it

from now on I'll try to give all options springing to mind no matter how rediculous