Jump to content

Sony MZ-R2 won't work, but test mode works fine

Rate this topic


Recommended Posts

Hi all,

Just recently picked up an MZ-R2. When you put a disc in any press play or stop, it makes a short motor noise but does nothing else. However when activating test mode all the systems seem to be working OK. The display comes on, the motor moves, power supply is good, etc.

I thought it might be the door sensor. I disassembled the lid and managed to find the door switch - neither activating the switch nor bridging the traces coming out of it with a pair of tweezers had any effect.

Does anyone have any other suggestions of what might be at fault?

Many thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...