Markr041 Posted August 24, 2004 Report Share Posted August 24, 2004 The Peter Ravn review says" The manual setting of the recording level can only be set during recording pause not while recording- Sorry (!) " Tha administraor of this forum seems to agree. However, I have the 800 and I can during analog recording set the level during recording, not only during pause. The review is wrong, unless the European model differs from the American model. Does anyone who has used the 800 have a contrary experience? The review and the news statement should be corrected, as it will mislead on this important issue many potential purchasers (I only care becaue I want minidisc to survive, which is made difficult when expert sites mislead). Quote Link to comment Share on other sites More sharing options...
dex Otaku Posted August 24, 2004 Report Share Posted August 24, 2004 The 700 I have, which I understand as being functionally the same as an 800 without radio, is the same - you have to have the unit in pause to switch to manual levels, but you can change the levels on the fly while recording. I can't attest to the other models but I believe all the Hi-MDs support this, as there are now enough controls [with the shuttle wheel on every model] to support both volume control and rec level control simultaneously. Quote Link to comment Share on other sites More sharing options...
reefbeef Posted August 24, 2004 Report Share Posted August 24, 2004 The NH1 must be in Pause Rec to switch to manual level adjustment, but once recording one can change levels on the fly. Recorder goes back to AGC when 'stop' is pressed. Quote Link to comment Share on other sites More sharing options...
minidisco.com Posted August 24, 2004 Report Share Posted August 24, 2004 I just tested this. You can switch to manual record levels while in pause. Once you make the switch, you can adjust on the fly while recording. It's not ideal, but it's not the step back implied by the review. -Matt Quote Link to comment Share on other sites More sharing options...
bhangraman Posted August 25, 2004 Report Share Posted August 25, 2004 It's a pain to have to pause it, wade into the menus and select manual volume control. If you happen to select stop instead of pause to break recording, you have to do it again. I don't know how easy this is te get used to, but I found it irksome. Quote Link to comment Share on other sites More sharing options...
dex Otaku Posted August 25, 2004 Report Share Posted August 25, 2004 Irksome, yes. But every MD I've ver used worked that way, and until now you couldn't change the levels withouth pausing either. Oh, sorry. Not every one. The ones that CBC had could be adjusted at any time, and had an actual switch for agc/manual. I don't know why they don't make it a 'sticky' setting. Most of the people I know have been complaining about this on Sony's MDs for years. Sony don't listen, do they. Quote Link to comment Share on other sites More sharing options...
bhangraman Posted August 25, 2004 Report Share Posted August 25, 2004 I don't know. Maybe they have a secret agreement with Sharp or something? Quote Link to comment Share on other sites More sharing options...
jadeclaw Posted August 25, 2004 Report Share Posted August 25, 2004 :laugh: Quote Link to comment Share on other sites More sharing options...
dave_bass5 Posted August 25, 2004 Report Share Posted August 25, 2004 Also when you go back to manual mode the levels are the same as you left them Dave. Quote Link to comment Share on other sites More sharing options...
reefbeef Posted August 25, 2004 Report Share Posted August 25, 2004 Right, this seems to be a slight improvement. The last Sony I owned was an MZ-R90. On this unit, even when I went back into manual everytime I started pause Rec, the levels were in some random position. On my NH1, the levels and mic sens setting appear to remain the same. Atleast we don't have to reset 3 things (manual, level, mic sens); just switch to manual. But this is still not nearly as convenient and stealth friendly as my Sharp DR7. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.