Drivers
11 files
-
NetMD driver (NETMD052) for all 32-bit Windows,
By sfbp
This driver will install in place of ALL known 32-bit NetMD drivers (eg NETMDUSB.SYS, NETMD031.SYS, NETMD033.SYS). It is to be used on all versions of Windows, including 7 and 8.
It WILL NOT work on Windows64 (the usual version for Windows 7 and 8)in any version of Windows. For that you need the (pinned) upload called "NetMD Driver 64-bit Win7 or Vista" elsewhere in this downloads section.
To get the benefit of fast NetMD upload on the MZ-RH1 (and MZ-M200) you must follow the steps in the first post here:
Ignore that step if you have never installed a NetMD driver before (you will know, if you are reading this) on this computer. If you don't do this on a system that has been used before with the "standard" drivers from Sony, your uploads to the RH1 will be TEN TIMES slower than expected. This will undoubtedly shorten your temper as well as the life of your precious RH1.
Please note: there will be a signing error during installation because the contents of the .INF file have been edited (relative to when Sony originally compiled it). You must ignore the error at install time, either by disabling checking of driver signing, or by overriding the default behaviour which may be to ASK whether you wish to ignore the signing error. Without this step you can not install the driver. In Windows 8 signing is forced on, and you have to (temporarily or permanently) make it optional. In earlier versions of Windows it is optional (on request) or may be turned completely off (not recommended). It's ok to turn signing off temporarily to install this driver, then set it back to its former condition after the install.
The error will be something like "STOP: are you sure you wish to proceed?" or some such terrible-sounding warning. It's quite safe, FOR THIS DRIVER, to ignore that. There's no change in the driver itself, only the information file which allows it to be installed on more units.
I hope this is useful.
I don't know what they've done to the software, I ended up with TWO new versions (except that the first one is NOT NEW).
You need the SECOND ONE.
1,833 downloads
- 32-bit windows
- slow upload fix
- (and 2 more)
Updated
-
NetMD Driver 64-bit Win7 or Vista
By sfbp
These are the drivers you will need to get NetMD devices to work with 64-bit Windows 7 and Vista. For Hi-MD devices in Hi-MD mode, no driver is needed, however for NetMD mode you will still need this.
Compatible models:
NetMD:
NW-E7/E10 MZ-N1 LAM-1 MDS-JB980 MZ-N505 MZ-S1 MZ-N707 MZ-N10 MZ-N910 MZ-NF810/N710 MZ-NF610/N510 MZ-NE410 MZ-NE910/NE810 LAM-10 AM-NX1 MDS-S500 AM-NX9 Sharp IM-MT880/899 Sharp IM-DR400/410 Sharp IM-DR420/DR80/DR580 Kenwood DMC-S9NET Panasonic SJ-MR250 Hi-MD:
MZ-NH1 MZ-NH3D MZ-NH900 MZ-NHF800/NH700 MZ-NH600/NH600D MZ-N920 MZ-DH10P MZ-RH10/M100 MZ-RH910/M10 MZ-RH1/M200 Others:
CMT-M333NT/373NT CMT-SE9 (Note: PCLK functionality will NOT work with this driver set, so no M-Crew is possible unless you use the XP virtual machine in W7 Pro or Ultimate)
Here's a video one user posted in the forums. Thanks muchly, "proudofmylife"
A word to the wise: if you want to see what is actually depicted (text), recommend watching on youtube rather than in this window here. That's an option if you right-click the screen shot here. That will allow you to view in full screen, thereby seeing the details quite clearly.
Stupid software, now there are TWO FILES, but you only want the SECOND ONE. The first is the previous version, and you need the one with August 2020 date.
11,457 downloads
Updated
-
Submitted
-
0 comments
Submitted
-
Submitted
-
NetMDusb.zip (old NetMD driver)
By sfbp
I *think* this is the USB driver for the early NetMD units, including the MDS-JB980. I am not 100% certain which units it supports, as I have only the 980 (it definitely supports that!).
Anyone with an MZ-RH1 or MZ-M200 will have problems uploading on that portable after installing this driver. In fact you need to take the first steps outlined in the first post of this thread post "Solution to slow SP upload".
Good luck!
769 downloads
Updated
-
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Submitted
-
PclkUSB.zip
By sfbp
Use this with all known versions of the all-in-one USB connected MD's such as:
CMT-SE9
CMT-M333NT and CMT-M373NT
It also supports the CAV10 and CAV20 (PCLK-MN10 and -MN20)
70 downloads
Submitted