Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 11/07/2013 in all areas

  1. Hi Raintheory and All who are into TOC cloning with the G750 and R700, There is a way to elegantly and "gracefully bypass" the first switch connected to the opening button without breaking anything. Furthermore, it's reversible if you should ever want to turn you unit back into one that shuts off when you open it. Looking at Raintheory's two photographs of the mechanism, (enlarge them on you screen), you see what looks like a piece of sheet metal in front of the black tab. The tab sticks up slightly above the notch in the piece of sheet metal. This piece of sheet metal moves forward when the "open" button is pushed in and slides over the black tab forcing it down. Pushing down that black tab is what has to be avoided. This following procedure should be performed only after removing the lower portion of the outer casing, which is also necessary to modify the other "second" switch. This gives you full access to the part that needs to be adjusted. Here goes: Rather than removing the tab by breaking it off, leave it completely alone. Instead, using very thin meddle nose pliers, grab the piece of sheet metal refered to above and gently turn it upwards to the left so that it is in a standing position instead of laying flat. Thereafter it will slide past the left side of the black tab instead if engaging it. Note: You twist / turn up only the portion of the piece of sheet metal up to the spot where it has a notch for the black tab to stick up, Once it is turned / twisted upward, make sure it does no rub against the bottom side of the deck that is just above it. A very slight downward adjustment will cure that. I will try to photograph my result and post it here so you can see exactly what it looks like when finished. jmsla James
    1 point
×
×
  • Create New...