Search the Community
Showing results for tags 'unsolved'.
-
Hello again Please read my first topic how the problem started and what i fixed so far: http://forums.sonyinsider.com/topic/29962-mz-rh1-recording-problem-hardware-solved/ After the recording mode worked like new, i have still recording problems. I know my workbench isn't.... but i did it with all my patient i can get in to it. So i think i didn't bend anything.... Reading normal disc = no problem Reading Hi-MD = no problem Writing normal disc = problem in the beginning = now normal Writing Hi-MD = not working.... Normal disc not recorded, but after i push with some force on the upper head it worked. So i forced bending the upper head a bit down, now the normal disc works. format, record, move, pc and mp3 (still i believe a bit slower than my working model) Hi-MD only plays. But in the middle of my adventure a short period of time it worked. also from pc and mp3. I just pushed the upper head (metal bending part) down with force..... Sometimes it works and other times i tried 1 hour and not a single time it worked. Does anybody have a solution? Is the problem the lower head/lens part, is the problem the upper part (to strong, to lose)? Is alignment needed or is the upper head not so important? Do i have to edit the parameters in the service mode? I hope you can see in the pictures how i push on the flex part to lower the upper head for testing. (really sometimes it worked, sometimes not.....) I know from opening my "good" RH1 the flex part in recording is flat on the metal part. Mine is still a bit in the air but i feel a good amount of force the head is pushing down on the disc in record mode.