champa Posted July 1, 2005 Report Share Posted July 1, 2005 Can anyone help me? I found everything about hacking rh10 and 910 but nothing of a sort about dh10p. Is there a way, if so, please show me how from Your personal experience. Thank you. Quote Link to comment Share on other sites More sharing options...
Ishiyoshi Posted July 1, 2005 Report Share Posted July 1, 2005 Can anyone help me? I found everything about hacking rh10 and 910 but nothing of a sort about dh10p. Is there a way, if so, please show me how from Your personal experience. Thank you.←Download the DH10P Service Manual and utilize the codes accordingly as described for the RH10. Quote Link to comment Share on other sites More sharing options...
champa Posted July 2, 2005 Author Report Share Posted July 2, 2005 So, let me see if I got this right;I have downloaded the service manual for dh10p and have seen the procedure for changing destination code as follows:1. Enter the test mode2. Press the Vol+ key to enter the Manual mode3. Press the FF key five time to select the item number 0113 and display follows the line 113 DistFl with two hexadecimal values that I need to change4. Press the Vol+/- key and set the according value: US - 28 AEP and UK - A0 Chinese and Tourist - 245. Press the joystick with function Play pause and enter to write the adjusted value6. Press the stop key four times to go back to test modeIs this right (looks like the exact procedure for RH10/910)?Which destination code i should choose if i buy european model?How do i enter service mode since i haven't seen this in the service manual (is it the same for all models)?Item number 0114 is mentioned - should i change this also to 80 as mentioned?At the end i have to take out the battery?What i gane or loose if choosing 24 and what with 28 value? Quote Link to comment Share on other sites More sharing options...
Ishiyoshi Posted July 2, 2005 Report Share Posted July 2, 2005 So, let me see if I got this right;I have downloaded the service manual for dh10p and have seen the procedure for changing destination code as follows:1. Enter the test mode2. Press the Vol+ key to enter the Manual mode3. Press the FF key five time to select the item number 0113 and display follows the line 113 DistFl with two hexadecimal values that I need to change4. Press the Vol+/- key and set the according value: US - 28 AEP and UK - A0 Chinese and Tourist - 245. Press the joystick with function Play pause and enter to write the adjusted value6. Press the stop key four times to go back to test modeIs this right (looks like the exact procedure for RH10/910)?Which destination code i should choose if i buy european model?How do i enter service mode since i haven't seen this in the service manual (is it the same for all models)?Item number 0114 is mentioned - should i change this also to 80 as mentioned?At the end i have to take out the battery?What i gane or loose if choosing 24 and what with 28 value?←If you employ code 24, you gain the ability to title and display tracks in Japanese/Chinese characters. Quote Link to comment Share on other sites More sharing options...
sir_cybo Posted October 29, 2005 Report Share Posted October 29, 2005 Hi Ishiyoshi,According to the service manual I have to short SL801 on the mainboard to enter test mode.Is there no easier way to enter the test mode without opening / disassemble the MD.regards,Shahid Quote Link to comment Share on other sites More sharing options...
Ishiyoshi Posted October 29, 2005 Report Share Posted October 29, 2005 Hi Ishiyoshi,According to the service manual I have to short SL801 on the mainboard to enter test mode.Is there no easier way to enter the test mode without opening / disassemble the MD.regards,ShahidWelcome to MDCF!I am not aware that you need to short SL801 to enter test mode for this particular model. Try and contact richyhu (Richard) or tmeg for advise. They are owners of the MZ-DH10P. Quote Link to comment Share on other sites More sharing options...
Richard Posted October 29, 2005 Report Share Posted October 29, 2005 Welcome to MDCF!I am not aware that you need to short SL801 to enter test mode for this particular model. Try and contact richyhu (Richard) or tmeg for advise. They are owners of the MZ-DH10P. Hi, I have never entered service mode on my DH10P as it is a Japanese model and the output is already at 5mw. The output on the EU model is a meagre 2.8mw. I do not endorse personally any of the steps mentioned below but... You could try the same method as is available for the RH10 to enter service mode: http://forums.minidisc.org/index.php?showtopic=9752 See above for the steps, then change the area code as per p.20 of the DH10P service manual, but please be very careful indeed - changing anything other than the destination code would likely render the unit unsable. Quote Link to comment Share on other sites More sharing options...
sir_cybo Posted October 30, 2005 Report Share Posted October 30, 2005 Hi,I tried using the RH10 method. It did'nt work for me.Can anyone enter into service mode for this modelusing the RH10 method? for testing purposes only!regards,shahid Quote Link to comment Share on other sites More sharing options...
caviara Posted January 24, 2006 Report Share Posted January 24, 2006 Hi,I tried using the RH10 method. It did'nt work for me.Can anyone enter into service mode for this modelusing the RH10 method? for testing purposes only!regards,shahid I also have tried this method several times and it does not work for the DH10p!If you have any sucsess entering the service mode without soldering on the motherboard, pleace let me know Quote Link to comment Share on other sites More sharing options...
potleyman Posted February 18, 2006 Report Share Posted February 18, 2006 I also have tried this method several times and it does not work for the DH10p!If you have any sucsess entering the service mode without soldering on the motherboard, pleace let me know Hi fellow MDers!!To enter the service mode on a European DH10P you'll need a LCD remote because nothing's visible on the units screen. 1. Press the play key to turn it on, 2. Slide the hold on, 3. Press & hold the volume- (down) button, then do the forward, forward, back, back etc key presses. When you're in the service mode the CHG & OPR lights flash on the unit. You can then either use the remote or the main unit buttons to change the 113 settings. If you've done it correctly you now have EQ custom 1&2 & full volume.....Be as deaf as you want....Your choice!!Best of LuckThe Potleyman Quote Link to comment Share on other sites More sharing options...
jonny mac Posted February 23, 2006 Report Share Posted February 23, 2006 I'd love a DH10P and will snatch one up if I ever see one at a reduced price. But only if I'm sure it can be hacked to 5mW, otherwise it's all but useless as far as I'm concerned. I'd be amazed if it couldn't be hacked just as easily as other first and second generation units. Quote Link to comment Share on other sites More sharing options...
potleyman Posted February 23, 2006 Report Share Posted February 23, 2006 I'd love a DH10P and will snatch one up if I ever see one at a reduced price. But only if I'm sure it can be hacked to 5mW, otherwise it's all but useless as far as I'm concerned. I'd be amazed if it couldn't be hacked just as easily as other first and second generation units.Hi jonnyTry www.greatuniversal.co.uk they are selling a DH10P for £165...You'll get a 20% discount if you've not used the site before...A MZ-DH10P for £131!!!!!!!!!!!!!!!!!The hack is the same as always...Just hold the volume- down button (instead of the menu or group button) when entering the service mode. You'll need to use a LCD remote as nothing's seen on screen. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.