bisjac Posted August 25, 2005 Report Share Posted August 25, 2005 the sonicstage 3.2 download on this site is nice, was newer then my version. but of course now it dont find my walkman. do i need drivers again?i found all these driver downloads all over the net but of course they do nothing.mz-nh600dits not as plug and play as i would have hoped -.- Quote Link to comment Share on other sites More sharing options...
Christopher Posted August 25, 2005 Report Share Posted August 25, 2005 Did you try the Personal Audio Driver in the Downloads section? Quote Link to comment Share on other sites More sharing options...
imdurc Posted August 25, 2005 Report Share Posted August 25, 2005 (edited) Do you have XP SP1 or SP2? Or neither. I'll tell you what happened to me...I had XPSP1 installed on the computer and I'd always held off SP2 because I didn't like certain things about it. Then I got an NH900 Hi-MD. The included 2.1 sonicstage worked well for me. And I was happy.Then I spied that there was a version 3.1 on this site and got the full pack. Installed it and lost my Hi-MD from the software. Couldn't get it back. Then I heard that maybe SP2 would help. I installed it and hurrah - it worked!So, ever since, I've been using my Hi-MD without any problems whatsoever. I'm loving it more and more. Hope this helps. Hmm... just checked my SS software and noticed, I don't have 3.2 installed.Later,Adam. Edited August 25, 2005 by imdurc Quote Link to comment Share on other sites More sharing options...
bisjac Posted August 25, 2005 Author Report Share Posted August 25, 2005 im updated to service pack 2.and i did try that dowload for all drivers.and still when i open my sonicstage, click on transfer, nothing comes up. device not connected. Quote Link to comment Share on other sites More sharing options...
Christopher Posted August 25, 2005 Report Share Posted August 25, 2005 Are you using a USB hub or the normal USB port on your computer? Quote Link to comment Share on other sites More sharing options...
bisjac Posted August 25, 2005 Author Report Share Posted August 25, 2005 under my computer it says a external drive is connected, and if i try to check harware, it says its working fine. just sonic stage cant find itim going to uninstall 3.2 and just use my cd Quote Link to comment Share on other sites More sharing options...
Christopher Posted August 25, 2005 Report Share Posted August 25, 2005 No no, uninstall via the directions in the FAQ and install Sonicstage 3.2 from connect.com. Quote Link to comment Share on other sites More sharing options...
imzu Posted August 26, 2005 Report Share Posted August 26, 2005 (edited) under my computer it says a external drive is connected, and if i try to check harware, it says its working fine. just sonic stage cant find itim going to uninstall 3.2 and just use my cd←I'm using a powered USB hub to connect my Hi-MD portable. I noticed that if the power to the hub was off, Windows XP would detect it as as external storage device but it would be invisible to SonicStage. USB devices that require electrical current from the PC do not always operate correctly through an unpowered hub with many other devices connected!However once I had power going to the hub, Windows XP found and loaded the drivers for the Hi-MD and it was visible in SonicStage once again.Make sure your USB hub, if you're using it, has a working power supply (or the switch on the hub is set to operate off the mains supply!). Failing that, locate a USB port that has a non-essential device, remove it and plug in your Hi-MD portable into that USB port. Edited August 26, 2005 by imzu Quote Link to comment Share on other sites More sharing options...
Daijoubu Posted August 27, 2005 Report Share Posted August 27, 2005 All installations of SS comes with all the drivers... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.