sylvestermoy Posted May 28, 2007 Report Share Posted May 28, 2007 Hi I have an MZ-R700, which is currently stuck in service mode (LCD screen blinks: all pixels, Ver 1.300 004, and blank).I'm really keen to restore this to factory defaults.. can anybody help someone who pressed the wrong button? Quote Link to comment Share on other sites More sharing options...
Richard Posted May 28, 2007 Report Share Posted May 28, 2007 Just remove the battery and you should exit service mode. If you actually changed any of the options whilst in service mode, you would have to change the values back again manually. Quote Link to comment Share on other sites More sharing options...
sylvestermoy Posted May 28, 2007 Author Report Share Posted May 28, 2007 Just remove the battery and you should exit service mode. If you actually changed any of the options whilst in service mode, you would have to change the values back again manually.Yup pulled the battery / power. Still doesn't leave the mode. As for changing the values back, well I can't remember that. I really did push some wrong buttons. Is there a way to reset the machine back to default or something like this? Quote Link to comment Share on other sites More sharing options...
yoshii Posted June 19, 2007 Report Share Posted June 19, 2007 Not really much help.But that happened to me once with an R900. I ended up playing around with it for a while, trying anything i could, and eventually i got it out of service mode & back to normal. This was a while back so i'm not sure what i did, maybe just play around with some settings? Find a service manual online perhaps?...Worse thing was that it was my friend's R900 which i borrowed to record, since mine stopped recording haha Quote Link to comment Share on other sites More sharing options...
BobS Posted June 19, 2007 Report Share Posted June 19, 2007 How long did you leave the battery out ? You may want to leave it out an hour or so. Sometimes it takes a while for the circuits to drain, capacitors can hold a charge a while. Quote Link to comment Share on other sites More sharing options...
Pierre-from-Amsterdam Posted April 18, 2021 Report Share Posted April 18, 2021 I cannot come IN the sevice mode. I did the hold vol minus pulldown ff bb fb fb pauze pauze lift finger from vol minus. Nothing happens. Display keeps blank. I did the remote out also. What now? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.