ka1ssr Posted February 16, 2010 Report Share Posted February 16, 2010 Is there a way to perform a reset on an MZ-R37 besides removing the batteries overnight? I have one that occasionally goes into the bananna mode (irrigular display, no button response, etc.) at random times. Very annoying. Thanks! Bill Quote Link to comment Share on other sites More sharing options...
sfbp Posted February 16, 2010 Report Share Posted February 16, 2010 Based solely on my experience with a similar thing with the MZ-R91, I would suggest: 1. remove the remote from the unit 2. clean the remote's contacts with contact cleaner spray and allow to dry before a final wipe with an absorbent cloth to remove any hydrocarbon traces 3. blow air into the socket (that you took the remote out of). Check the contacts are good (if you can). Hope this helps, YMMV Stephen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.