Another MD fanatic Posted November 26, 2012 Report Share Posted November 26, 2012 I'm new to this forum so firstly hello to you all and apologies if I've posted this in the wrong place (I often do). Just been looking at your list of drivers for 64bit Windows 7 and I notice the Aiwa NX1 is on the list. Is this also suitable for the NX9? If not - HELP!! Thank you for your time Quote Link to comment Share on other sites More sharing options...
sfbp Posted November 26, 2012 Report Share Posted November 26, 2012 Looks like this one slipped through the cracks. Generally Sony devices got more attention as there are more of them. Mind you these AIWA devices were probably made by Sony as the Vendor ID (VID) is still Sony. You need to add another line into NETMD760.INF in the [ControlFlags] section which is an exact copy of the line for the NX1 EXCEPT that "0113" is replaced by "014C" (the USB PID for the Aiwa NX9). Like this: ExcludeFromSelect=USBVID_054C&PID_014C ; AM-NX9 and another one lower down in the [sony] section %NETMDUSB.DeviceDesc%=NETMDUSB.Dev, USBVID_054C&PID_014C ; AM-NX9 I will PM you a copy of the NETMD760.INF file with the changes made now. Good luck. If you get it working please let us know, and we will modify the official downloadable copy. Quote Link to comment Share on other sites More sharing options...
jim.hoggarth Posted November 30, 2012 Report Share Posted November 30, 2012 Thanks for that Stephen. I have been meaning to do this myself, since I had an AM-NX9 returned by a customer because it would not work on W7. Jim Quote Link to comment Share on other sites More sharing options...
Another MD fanatic Posted December 9, 2012 Author Report Share Posted December 9, 2012 Apologies for the delay in responding, been having some other (unrelated) issues with my PC. Anyway, all done and works fine. Took me two attempts, had to help it along and tell it what to do, mostly down to Windows not being as clever as it thinks it is! So I can quite confidently say that the AM-NX9 does work ok with 64bit Windows 7. Happy to assist if anyone else is having problems with this. Thanks for your help and assistance. Steve Quote Link to comment Share on other sites More sharing options...
sfbp Posted December 9, 2012 Report Share Posted December 9, 2012 Grrrrrrrr8!We'll add that into the downloadable version then.Merry Christmas Quote Link to comment Share on other sites More sharing options...
sfbp Posted December 10, 2012 Report Share Posted December 10, 2012 Update: done!sfbp Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.