Boomchild Posted September 23, 2014 Report Share Posted September 23, 2014 So I have this Victor XM-PX33 which seems to have a loose headphone jack. When I looked to taking the unit apart, I can only locate one screw on the outside of the case which does not seem to allow me to get the unit's cover off. I was wondering if anyone here has worked on these and can shed some light on how to disassemble the unit. Any help would be greatly appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
PhilippeC Posted September 23, 2014 Report Share Posted September 23, 2014 Maybe Sergio http://forums.sonyinsider.com/user/118374-sescoscuba/ Quote Link to comment Share on other sites More sharing options...
Jimma Posted September 23, 2014 Report Share Posted September 23, 2014 A diagram and instructions on how to at least start to disassemble this unit can be found at the link below. Hopefully you will be able to figure out the rest of the process. It looks like the rear casing will have to be removed after you have taken apart the front of the unit. I hope this helps and good luck:) http://www.manualscenter.com/manuals/jvc/xmpx33wtbu-service-manual.html#.VCEo-mex7IU Quote Link to comment Share on other sites More sharing options...
Boomchild Posted September 27, 2014 Author Report Share Posted September 27, 2014 Thatnks for the responses and the link. I believe this will help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.