LumpSum Posted January 28, 2016 Report Share Posted January 28, 2016 Hi, i have a mzn10 that I swapped the battery in because the original was toast (even though the unit itself looks insanely mint) but the ac adapter i have is only 5v and it refuses to charge the internal through the cradle, i did not receive the standard sony cable with the kit but i wasn't too bothered because i thought i could eventually get the 6v adapter needed later and charge it like that and somehow mod the cradle for standard usb cables, if anyone had any info on this that would be great, if not, i tried thanks Quote Link to comment Share on other sites More sharing options...
sfbp Posted January 28, 2016 Report Share Posted January 28, 2016 Look in the service manuals... should be all there, Quote Link to comment Share on other sites More sharing options...
LumpSum Posted January 29, 2016 Author Report Share Posted January 29, 2016 hi, thanks for the reply, i did notice it has the vbus pins but wasn't sure which way is up on the plug itself, i assume it's top down. i'll figure it out. Quote Link to comment Share on other sites More sharing options...
LumpSum Posted January 29, 2016 Author Report Share Posted January 29, 2016 seems easy enough, i wonder if cradle detection is just there so it knows not to accept voltage from that side, there's only 4 wires breaking off from the cradle side transporting to where the sony cable is then linked to the cradle. usb only has 4 usable, this shouldn't be too hard, i will report back with my findings. i will take photos when i begin the process. Quote Link to comment Share on other sites More sharing options...
ykulin Posted May 1, 2019 Report Share Posted May 1, 2019 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.