Jump to content
  • 0

Enable Virtualization - Vaio VGN-FZ240E BIOS

Rate this question


Xavier Gonzalez

Question

1 answer to this question

Recommended Posts

  • 0

I don't know if that model even supports Virtualization, but I would try this link:

 

https://www.sony.com/electronics/support/laptop-pc-vgn-series/vgn-fz240e/articles/00049036

 

Then review these steps and check if you actually have the option in the BIOS:

 

Press F2 or F3 when restarting:

Alternatively: F1

 

  • If your VAIO has an ASSIST key, try to press and hold it while you power on the laptop. This also works if your Sony VAIO came with Windows 8
  • With the computer turned completely off, press and hold the Assist button until the black VAIO screen appears
  • NOTE: The location of the Assist button will be different depending on the computer model. Refer to the operating instructions supplied with the computer for the exact location of the Assist button on your model
  • At the VAIOCare | Rescue Mode screen, press the Down Arrow key until the Start BIOS setup [F2] option is highlighted, and then press the Enter key
  • In the [BIOS Name] Setup Utility screen, press the right-arrow key until the Advanced tab is selected
  • On the Advanced tab, press the down-arrow key until Intel(R) Virtualization Technology is selected and then press the Enter key
  • Use the arrow keys to select Enabled, and then press the Enter key
  • Press the right-arrow key until the Exit tab is selected
  • Press the down-arrow key until Exit Setup is selected and then press the Enter key
  • In the Save screen, verify Yes is selected and then press the Enter key
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...