1kyle Posted February 27, 2005 Report Share Posted February 27, 2005 Hello everybody -- Sometimes I'm still using a Net-MD MZ-N10 (for non HI-MD disks it's a great 2nd unit even thinner than the NH1 HI-MD unit whic I think is great.On the back of the unit it has TYPE-S which I'm not sure what it means or does.I've also got an old cheapish Mini Bookshelf system (MDLP) which has TYPE-R stamped on it.Can anybody explain what these mean and what do they do (if anything).I'm also sure it's been posted before but for 80 and 74 Min mimidiscs (and I've still got a few of the original 60 minute one's) I can't hear any discernible difference between LP2 and HI-SP --and LP2 gives a few minutes extra recording times.On the 1GB discs of course you have to use them in HI-MD mode.On DECENT equipment and speakers is there any noticeable difference. Even PCM doesn't sound very different (if at all). -- Of course this I know depends on the original quality of the source but I'm usually ripping Classical Music CD's -- not MP3's etc so the original CD quality should usually be very good.(Real sound -- not just "Measurebating".Cheers-K Quote Link to comment Share on other sites More sharing options...
jadeclaw Posted February 27, 2005 Report Share Posted February 27, 2005 Type-R is the lastest incarnation of the ATRAC-codec for SP (Standard Play).Type-S is a playback improvement for the MDLP-modes.Speaking of Soundquality, it depends on the material, that is used.However, even with the latest SonicStage version (2.3) there is still a difference between LP2 and SP/HiSP/PCM. But, that difference is small and only audible with a good set of speakers or headphones and in direct A/B comparison. So, for everyday listening or on the road, LP2 is adequate.Btw, you do can use LP2 on HiMD formatted discs when transferring using SonicStage.For serious concentrated listening and live recording, I still recommend the higher modes, especially, when the recordings are processed/edited later. Quote Link to comment Share on other sites More sharing options...
imkidd57 Posted February 27, 2005 Report Share Posted February 27, 2005 (edited) On the back of the unit it has TYPE-S which I'm not sure what it means or does ... I've also got an old cheapish Mini Bookshelf system (MDLP) which has TYPE-R stamped on it.From the minidisc.org site FAQ:http://www.minidisc.org/faq_sec_4.html#Q9http://www.minidisc.org/type_r_atrac.htmlAFAICS it's to do with the way that the DSP sets things up for the ATRAC encoder to operate on. Edited February 27, 2005 by imkidd57 Quote Link to comment Share on other sites More sharing options...
xispe Posted February 27, 2005 Report Share Posted February 27, 2005 Atrac SP Type-R rules! For me it's the best quality mode... much better than hi-sp Realtime recording rocks! Quote Link to comment Share on other sites More sharing options...
Michael1980 Posted February 27, 2005 Report Share Posted February 27, 2005 How about 4x Type R SP recording. That is even better! Quote Link to comment Share on other sites More sharing options...
xispe Posted February 27, 2005 Report Share Posted February 27, 2005 hmmmmm... tasty! Quote Link to comment Share on other sites More sharing options...
Asia Posted February 27, 2005 Report Share Posted February 27, 2005 Atrac SP Type-R rules! For me it's the best quality mode... much better than hi-sp Realtime recording rocks!←High five my friend hehe Quote Link to comment Share on other sites More sharing options...
ROMBUSTERS Posted February 28, 2005 Report Share Posted February 28, 2005 High five my friend hehe ←and here i half expected you to say 'sp's ok... but not compared to PCM!' Quote Link to comment Share on other sites More sharing options...
Guest NRen2k5 Posted February 28, 2005 Report Share Posted February 28, 2005 Atrac SP Type-R rules! [...] much better than hi-sp←That's your opinion. I think the opposite. Quote Link to comment Share on other sites More sharing options...
zerodB Posted March 2, 2005 Report Share Posted March 2, 2005 How about 4x Type R SP recording. That is even better!←That would be good, provided it even existed to begin with! If you're referring to the 4x CD->MD dub on Type-R MD decks/bookshelfs, then I believe the ATRAC 4.5 encoder is used when doing hi-speed recording (and not Type-R). Still, I haven't really bothered to take a good listen on my bookshelf, took this fact for granted, and did all my recording in SP real-time.Can anyone confirm this is true? Quote Link to comment Share on other sites More sharing options...
Guest tony wong Posted March 2, 2005 Report Share Posted March 2, 2005 answer :type R : only works on recording side on SP onlyit's a better alogrithm to analyse the bits from ur recording sourcetype S : type S DOES include type Radditional thing is the improvement on playback of LP2/LP4 trackstype S only works when u have a player that have type S and only works when playing LP2/LP4 tracks, will not works for SP tracksmain difference :type R works at recording sidetype S works both at recording side(coz it include type R) and playback side(for LP2/LP4 only)type S claimed to produce better sound at playback side on treble part of LP2/LP4 tracksand, type R only work in real time recordingany fast cd-->md dubbing won't have type R functionif u doubt about type R only work at real time, u can contact Sony CS representative at ur regionno, this information is hidden from ur manualsbut, if u ever contact any one in Sony who know something about MD, they will surely tell u what I've just told u Quote Link to comment Share on other sites More sharing options...
Guest tony wong Posted March 2, 2005 Report Share Posted March 2, 2005 Atrac SP Type-R rules! For me it's the best quality mode... much better than hi-sp Realtime recording rocks!←thx, what u've told me just stop me from buying a Hi-MD unitthought Hi-SP will be better than type R SP Quote Link to comment Share on other sites More sharing options...
zerodB Posted March 3, 2005 Report Share Posted March 3, 2005 Tony, you should probably check for yourself before assuming other peoples statements to be correct.Download SS2.3, and rip some CDs into Hi-Sp. I know listening on ur PC isn't the same as your unit, but it's worth a shot, see if you can tell the difference.From what I hear, the general consensus is that SP is better than Hi-SP, but only MARGINALLY so - you wouldn't be able to tell the difference. IIRC, it took one of the people who was comparing the codecs about 15 mins of repeted listening in an ABX test to come to any definate conclusions.I guess for all practical purposes, the two codecs are the same. Perhaps Hi-SP lacks the sheen that Type-R SP colours to the sound. I don't know. Quote Link to comment Share on other sites More sharing options...
Guest tony wong Posted March 3, 2005 Report Share Posted March 3, 2005 Tony, you should probably check for yourself before assuming other peoples statements to be correct.Download SS2.3, and rip some CDs into Hi-Sp. I know listening on ur PC isn't the same as your unit, but it's worth a shot, see if you can tell the difference.From what I hear, the general consensus is that SP is better than Hi-SP, but only MARGINALLY so - you wouldn't be able to tell the difference. IIRC, it took one of the people who was comparing the codecs about 15 mins of repeted listening in an ABX test to come to any definate conclusions.I guess for all practical purposes, the two codecs are the same. Perhaps Hi-SP lacks the sheen that Type-R SP colours to the sound. I don't know.←I don't have a Hi-MD so I'll have to trust others, right?and, why u tell me to check for myself?U mean I am ill? Quote Link to comment Share on other sites More sharing options...
zerodB Posted March 3, 2005 Report Share Posted March 3, 2005 No sorry, you misinterpereted me. I just meant to say that you shouldn't take everybody elses word for granted.Some people say SP is better, other say Hi-SP is better. ABX tests have generally revealed SP to be only minutley better. Yet others claim that the presence of artifacts is more noticable in SP to begin with. This goes to show that no-one elses test can really be valid in the sense that you will always hear things differently. In other words, your milage may vary.You don't need a Hi-MD to test out Hi-SP, just SonicStage. Why not use your CMT-333NT unit as a basis for comparison? Play a song on an MD from a CD recorded in Hi-SP, and then play the same CD track ripped in SonicStage to Hi-SP with the 333NT hooked up to your pc via USB.This way you can validate these claims for yourself. The point is that validating audio codecs is a very subjective field - and one persons's opinion may not be true to you perception. Hell, you may even find that even if everyone else says one thing, you still experience something different.Take advice with a grain of salt, is all i'm saying. Quote Link to comment Share on other sites More sharing options...
Michael1980 Posted March 3, 2005 Report Share Posted March 3, 2005 (edited) That would be good, provided it even existed to begin with! If you're referring to the 4x CD->MD dub on Type-R MD decks/bookshelfs, then I believe the ATRAC 4.5 encoder is used when doing hi-speed recording (and not Type-R). Still, I haven't really bothered to take a good listen on my bookshelf, took this fact for granted, and did all my recording in SP real-time.Can anyone confirm this is true?←So 4x Dubbing is not Type-R? Is there any linkage on this?I think you might just be right anyway, since Type-R is esseantialy a 2pass encoding process. Edited March 3, 2005 by Michael1980 Quote Link to comment Share on other sites More sharing options...
Guest tony wong Posted March 4, 2005 Report Share Posted March 4, 2005 (edited) So 4x Dubbing is not Type-R? Is there any linkage on this?I think you might just be right anyway, since Type-R is esseantialy a 2pass encoding process.←ask anyone in Sony who ever knows at least something about MD, he/she will tell u this is 100% truth, butjust staying behind all of ur manualwell, u can see on indication for that :when u record in real time and in SP, u will see "NORM" logothat is itYou don't need a Hi-MD to test out Hi-SP, just SonicStage. Why not use your CMT-333NT unit as a basis for comparison? Play a song on an MD from a CD recorded in Hi-SP, and then play the same CD track ripped in SonicStage to Hi-SP with the 333NT hooked up to your pc via USB.←the fact is I can't even figure out the difference between SP and LP2 nowbut I can tell u something else as reply :the times when I first use this E710, I feel, wow, the sound is so "little" compare with my old E35but then I found this unit have equalizer, then I tuned the equalizer(like on my Winamp on playing mp3), move higher on treble parttoo long to mention, reply u later[added]to say in short : the new headphones from Sony(MDR-Q23SL) make me feel stupidthe sound come out of it is like sound from radiothe bass is very weak compare to my old Q33SL Edited March 4, 2005 by tony wong Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.