cosmolv Posted April 24, 2019 Report Share Posted April 24, 2019 Hi everyone! I know that this software are only for Repair services, but since minidisc repairing are no more covered by SONY officially, maybe somebody have this software. Because sometimes i get in service MD units that are messed up with service menus and there are no other way than "rewriting the patch data" So, if somebody good person like to share it, i will appreciate it. Quote Link to comment Share on other sites More sharing options...
sfbp Posted April 25, 2019 Report Share Posted April 25, 2019 So how did you get that image? Was it posted somewhere? My impression is that each model required a whole separate installation, clearly ridiculous. But we need to find out which part changes between models. Incidentally I've never had this trouble with a NetMD unit, it only becomes essential if you change the mainboard, because everything is serialized. Do you know what a leaf ID is? (hint: i do). Quote Link to comment Share on other sites More sharing options...
cosmolv Posted April 25, 2019 Author Report Share Posted April 25, 2019 9 hours ago, sfbp said: So how did you get that image? Was it posted somewhere? My impression is that each model required a whole separate installation, clearly ridiculous. But we need to find out which part changes between models. Incidentally I've never had this trouble with a NetMD unit, it only becomes essential if you change the mainboard, because everything is serialized. Do you know what a leaf ID is? (hint: i do). Application Window are from service manual. With that software you can read down all data from MD unit, rewrite it and upload back. You can read and see what is wrong and messed up with it. (if you know what you do of course) It has all needed date in the software. So if somebody messed up, you can fix it quickly. I got some units that are screwed up. And to fix these i need That software to set all back to original state. Quote Link to comment Share on other sites More sharing options...
sfbp Posted April 26, 2019 Report Share Posted April 26, 2019 i think the best way to go back is to do a 911 followed by a self-alignment. More later, in a rush here. Quote Link to comment Share on other sites More sharing options...
cosmolv Posted April 26, 2019 Author Report Share Posted April 26, 2019 10 hours ago, sfbp said: i think the best way to go back is to do a 911 followed by a self-alignment. More later, in a rush here. That not working in my situation, service menu are screwed up so mutch, that there are no other way to revrite data completely. Quote Link to comment Share on other sites More sharing options...
sfbp Posted April 27, 2019 Report Share Posted April 27, 2019 Even with solder bridge? You may still need dual regulated PS for voltage adjustment of USB, though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.