Jump to content


  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by kgallen

  1. Hi, Looking at the SM p55 CN701 (which mates to CN800 on p43).I don't know what type if loom this is, but as it looks to be double row from the PCB layout, maybe the connector is pin-in-body type. If it is, is it possible to swap around pins 7 and 9 in the CN701 mating connector? This will swap JOG0/JOG1 and possibly could correct your rotation direction issue. I've recently replaced a similar encoder in my Tascam MD-CD1, and also had to use a Bournes part because the Alps part with the correct shaft length is discontinued. Fortunately the Bournes was pretty much an exact replacement and works correctly (if maybe a little stiffer). Regards, Kevin
  2. Stephen - I don't mind either way, your help has been invaluable, thank you. When the LPM arrives I'll see if I can fathom that out and piece together more of the puzzle! Thanks! Kevin ETA: Nope we're not playing "read the TOC" any more on the 11 setting (or the 10 setting!). Disc reads fine in the '520, but the '530 he say C13 at the moment! Back to the drawing board...!
  3. So tonight, ye olde MDS-JE530 decided, from "cold" (room temperature) that it didn't want to read discs. Aha, here's my chance to have a tweak of the laser read power! (I don't have an LPM yet, so just nudging one step as per Stephen's suggestion). Starting point: LDPWR 0.9mW$10 (for reference/comparison LDPWR 7.0mW$91) Try one click down to 0F -> NG. Go back to 10 -> still NG. Go two clicks down to 0E -> NG. Try one back up to 0F -> NG. Try back at original value 10 -> NG. Let's go crazy and go one click up, try 11 -> TOC reads and is still doing so with a few more loading trials... So is this real or just concidence, or maybe it's warmed up a bit - ok the whole sequence only took a couple of minutes, but who knows! Let's test again some more now, and try again "from cold" tomorrow! Is it possible that this machine has so few running hours because the factory setup was just a touch too low for read making it unreliable for the original owner with the C13 Read Error problem? I can't see that the laser output power would have deteriorated with the recorded use it's had. Cosmetics don't suggest the machine has had heavy use and thus might have been "clocked". Maybe a little early to judge or draw conclusions, I guess only time will tell! OK, so just for interest I adjust back to the original value of 10 -> surprise, surprise, TOC reads! I think I'll go back to the 11 setting and test again tomorrow. Who can tell! I've just had a look at the settings on my fully-functioning MDS-JE520. I get: 0.9mW$11, 7.0mW$96, 0.7mW$0D, 6.2mW$85, IOP=55.8/55.4. I think this leaves me a little more comfortable trying the 11 setting on the 530, although I realise all of the lasers have the drive tuned to match their particular characteristics.
  4. Ok, job done! Cheers. I’ll let you know...! Kevin
  5. Sorry for the late nudge on this one. NGY, can you remember the part number/style of this 6P plug for the IOP measurement jig? The SM does not identify the manufacturer/series number. It may well be a JST part as is common with Japanese kit - certainly my Tascam MDs seem to use JST PCB connectors, but a tiny variety! Also the PCB inside the MD shell - is that one you designed/etched yourself? It's very neat! Thanks, Kevin
  6. Hmmm, interesting. What sort of device would I be looking for (sorry it would be "on eBay"...), makes, models to look at and to avoid, and does it need any "attachments" such as a "remote" sensor that can be positioned close to the OP with the OWH in the way? What sort of money would I be looking at (any currency I can convert to GBP!). Needs to be able to sense 780nm light, clearly! So as an example does this look appropriate? Handles 780nm and power range to 20mW. The sensor looks a little on the large size for MD access but seems to be "the right sort of thing". https://www.ebay.co.uk/itm/OPHIR-laser-power-Meter-Monitor-USED/253314347677?hash=item3afab6329d:g:xeIAAOSw-jFaM-V3 http://www.ophiropt.com/laser--measurement/laser-power-energy-meters/products/Laser-Photodiode-Sensors/Special-Photodiode-Sensors/BC20 Thanks!
  7. Hi Stephen, Well this had me completely foxed the other day when I was trying to find the IOP value. Everything I read online suggested I was looking for a pen-written number. On the top of the OP there was a printed number in blue, but this did not have the format I expected for the IOP. However... when I was inspecting the mechanism for broken teeth etc I spotted the edge of a label on the underside of the OP sled. By winding the sled gears to move the sled to a mid-track position I was able to move the label into a small window/cutout in the transport metalwork. And this label was the ID information as shown on p27 of the SM: a computer printed 3-line label showing KMS260B/19X91/H0564. So in the end not a number scribbled on with a permanent marker, but a proper printed label! The testing regime must have come along a step or two! So back to the machine, and of course by writing this I will doom things, but today I've not made the JE530 fail at all. I played with it this morning and it was fine, I left the machine on all day whilst I was at work, I came home this evening and had a play and it's behaving. Maybe the new grease has soaked in a bit! So I'm going to hold off on the IOP tweak just for now. I will however report back if the desk gets up to mischief again! Thanks and regards, Kevin
  8. When you say "one notch" is this "one notch" of the tenths value (viz change down from 56.4 to 56.3) or the units (56.4 to 55.4)? I will presume the tenths for now as a "small" change! Thanks for the help.
  9. As I understand it, it's supposed to contain the value on the label on the laser which I presume is some measurement made at the factory to set the drive current required for the laser to emit a specified intensity of light. I then presume (!) that the IOP value is used by the controller to set the laser current used - how this is translated for reads and writes I don't know, as the two values will be quite different to achieve the low-power read and the high-power write (Curie temperature) requirements. I don't think the SM gives much background, but I'll have a read again tonight to see if it makes more sense now I'm considering "having a fiddle" with it! I've not got any pre-recorded MDs; all of mine are MO type. I quite fancy getting Jeff Wayne's War of the Worlds on MD though! Thanks for the LDPWR info.
  10. If you're still looking, there is this 930 on eBay.co.uk at the moment (not related to me at all, I just found it): https://www.ebay.co.uk/itm/Sony-MDS-JB930-Minidisc-Recorder-QS-RANGE-Rare-MD-Amazing/132500874503?hash=item1ed9aae507:g:Qu4AAOSwy4taf1N4 The seller also has another two MD machines: an MDS-W1 (twin MD!) and rack mount MDS-E10: https://www.ebay.co.uk/itm/Sony-MDS-W1-TWIN-MINIDISC-DECK-Rare-MD-1/132500816402?hash=item1ed9aa0212:g:fD8AAOSwqfZaf0N0 https://www.ebay.co.uk/itm/Sony-MDS-E10-PROFESSIONAL-Minidisc-Recorder-Rare-MD/132500805920?hash=item1ed9a9d920:g:aAgAAOSwHYVaf0At They all look cosmetically neat, bright displays. Separately there's a Tascam MD-350 here that claims to be in mint condition: https://www.ebay.co.uk/itm/Tascam-MD350-Professionial-Mini-Disc-Record-replay/132498502894?hash=item1ed986b4ee:g:uFwAAOSwubFae3YE
  11. Hi sfbp, According to the SM, this drive is MDM-5D. Given the laser seems to be almost new from the play/rec hours, I'm really hoping it is a simple issue. I did inspect the mechanism quite closely and it looks brand new, no signs of stress or discolouration or dirt etc and no missing or stressed teeth that I could see - certainly no noise from the mechanism either good or unsuccessful TOC read. Quite bemusing as a result! OK, that's helpful thank you. Actually other than during test procedures I don't think I've actually "recorded for real" with this deck so I can use a disk from my JE520 or one of my Tascams. When the unit is working the head is as smooth as anything. No jitter or wobble at all. When you AMS to a new track the head slides gracefully to the new point, there is a quick alignment seek then the track is running, looks perfect. I've been using a disk that is "full" and the servo and OP can track without issue to both the centre and very edge of the disk without noise or jitter so again, that looks perfect. As an aside it was interesting to see that the read buffer seems nice and large - I put the unit onto Repeat All, and played the last track. At a whopping 12secs to track end the OP moved back to track 1 ready for the repeat - I thought these units had a 6sec buffer (I think that's the minimum required by the MD spec), but this would imply 12 seconds or so :-) Do no harm first were my thoughts, so I had a good read around the subject from contributors (like on here) who appear to know genuinely what they were talking about, and then assess what I knew was ok and what could be suspect! IOP adjust a click then... Cheers, Kevin
  12. Hi sfbp, Adjusting the laser power was something I didn't try pending more informed input on what I should do rather than "hacking" blindly. I'll pluck up the courage to try your suggestion! On MDS-JE530 I don't believe there is a belt, I think it's all gears - certainly I can trace the gear train from loading motor to the crank arm that traces a slot on the loading cradle. Looking at the three servos in the unit, I don't see any belts in this particular drive: disk servo is direct drive, sled drive looks to be all gear train to the rack too. Thanks, Kevin
  13. Sorry for yet another thread on a C13 TOC read error... however having lurked on this Forum for a while I've signed up in the hope some of you knowledgable chaps can help me out with my MDS-JE530... I think I've tried/performed most of the usual rectification steps advised for C13 but I've still not cracked it. I'll start with a little background which is that I use MD at my amateur theatre group. I'm at the point of moving back to using more MD because I'm sick of CD unreliability and the solid-state offerings I've looked at are either cheap junk or way out of my price range. And of course you never let any sort of PC near a live performance... So, aside from other Sony and Tascam MD machines I have a MDS-JE530 sitting on the shelf with an annoying C13 issue and I've gotten it off the shelf with the aim of fixing it (I've been in a "fixing" mode recently with various pieces of kit!) and thus bringing it back into service. What I've done: cleaned the laser lens with IPA (not the beer!). Cleaned and carefully regreased the rails and gears with Molykote EM-30L synthetic grease. Scanned the Service Manual and G**gle for any other bright ideas. This machine will either read MDs (MO type) and play and record perfectly, or I get C13 when trying to read the TOC. If the TOC is read the machine will play (and when tried, record) perfectly, no subsequent C13s or any other error. I can eject and reinsert many times and I can get C13. An hour later I can try again and it will read the TOC and play perfectly many etc times. It's driving me mad because I just can't get it reliable. Just when I think I've cracked it, I'll get another C13 again. This is what I've determined: it's had little use: reading the service info from the machine, play hours 80, record hours 77 - it's virtually brand new. Software code is 530 990797. IOP read gives me "56.4 / 54.4" and the laser label is marked H0564, so IOP looks in order (other label info: KMS260B 19X91). Retry errors are clean "r00 p00" but total errors as FF. Error history is EB6 (whatever that is) plus the rest are E04 like everyone gets. When I do continuous play, then AD=00 (maybe the odd 01 as allowed). Temp Check is OK. I can CPLAY MID, IN and OUT and it's error free and there is no noise and the sled tracks smoothly at all points. The mechanism is quiet. I've inspected as much as I can and there are no broken gear or rack teeth that I can see. The machine is clean internally. It's well behaved otherwise. The disk detect and record protect tiny switches seem to be clean and moving freely, so I believe the disk insert is being detected. None of the MDs I'm using have bad label positions. The disk appears to nest correctly - trying different insertion speeds (the best I can with an autoloader) doesn't seem to throw the disk to a more reliable position. All springs appear to be in place and tensioning as required. When the TOC can't be read, the machine is spinning the disc, slowing and retrying. But the sled doesn't move - then of course I get C13 because the OP is not searching/reading the TOC. When this happens there is no mechanism noise - I can't hear any motors straining and there are no vibrations - just the OP sled doesn't move. I can eject and try again, and often the OP sled will track and TOC can be read, other times the sled is stationary. I just can't work out why sometimes it will track and read, others not. In Service Mode I did try the << and >> sled movement and usually this will work fine. I have however observed some occasions where the sled will slow and appear to struggle - in both directions. On a couple of occasions the sled, after slowing, did "stick" and wouldn't move more. Since recleaning and regreasing the rails this doesn't seem to have reoccurred but this could be coincidence. So... what's the one thing I haven't done that will solve this? I reach out to the community to help me solve this one and keep this machine alive and back into service where this great format should be! Thanks and regards, Kevin ps I don' t have a LPM or 'scope so a Fluke DVM is about my limit with test kit access. I do have the Service Manual and also own a fully-functioning MDS-JE520 if comparison is needed. pps All of my discs are Sony or TDK. Tried both, same symptoms. All recordings are SP, nothing fancy going on here!
  14. Hi Arr, Some of the data/images on here might provide some of the info you're after: http://tascam.com/product/md-350/images/ I have no experience of the Sony units you list so I can't give an A-B comparison. Regards the MD-350, I have it mounted in a rack case as I move it around for shows. It's probably not "pretty" enough for a home hi-fi setup as it's a "pro" unit with rackmount; I'm sure the Sony's are much more aesthetically pleasing. The switches/connectors are solid enough (whatever that means) although I'm not sure the MD-350 is (was) that high up the Tascam range. But I find the Sony's pretty good too - here I'm talking about MDS-JE520/530 that I also have, although I realise the JB units you're looking at are higher end Sony units. Having had a Tascam MD-CD1 and a Sony MDS-JE530 to bits recently, their construction is pretty similar for the front panel. They are a number of PCBs mounted behind the front panel on which the display and switches etc are mounted. I wouldn't say there is much between them construction-wise from that aspect. The MD-350 is a fluorescent display much like the MDS-JE5[23]0, but the filter screen gives it an orange colour compared to the "silver" of the Sonys. Personally I prefer the look of the Sony display, and the Sony's certainly have more information available simultaneously (titles and time at the same time). The Tascam comes across as a little less thought-through in the design phase on the screen layout. I've always been impressed with the build and features of the Sony MD units - I guess they were never a "budget" item. I think the Sony's I've used have more complete features accessible from a proper front-panel accessible menu system. The MD-350 is a bit more "ad-hoc" in my view and you need a PS/2 keyboard for e.g. Auto Ready (=Sony Auto Pause) which is a function I always use, so have to make sure I have a keyboard with me. Having said that, having the proper keyboard for titling is a dream. Even with the MDS-JE520's "full" remote control, titling is a bit of a drag! Overall feature-wise there's not much between the Tascams and the Sonys, it's just the Sony's feel a bit more polished on the user interface! Having said that, I love my Sony's for some things (in the house, making masters) and the Tascam for others (on the road, titling). Horses for courses maybe? However overall, and even though it's 2018, I'm moving back to MD more and more for my theatre work. I'm just sick of CDs playing up, skipping, being temperamental, bad CD-Rs etc etc. Conversely my MDs are rock solid and have other benefits for me like titling as standard and supporting very short tracks, which is essential for back-to-back short sound effects. CD minimum track length is 6 seconds which is just unworkable for me sometime, so I've pretty much always used some MD for shows, but frankly it's going to be a lot more now. Having just saved a Tascam MD-CD1 which can do CD to MD dubbing including titles and track marks, most stuff is going to end up on MD for the shows... So... I'm not sure if I've helped at all. If there is a more specific question where I can give a more quantitative answer, then just shout and I'll see what I can do. Regards, Kevin
  15. Of course I'm quite late to this thread but as this forum seems like a good semi-historical resource I might as well contribute! I've got a number of Sony and Tascam MD decks that I use at home and also for sound at my amateur theatre group, so can try and help out. Regarding the Tascam MD-350 I can make a couple of comments here regarding usability (rather than audio) that pertain more to my use model for theatre music and sound effects rather than home audio use. 1. On the display you can have titles or time showing, not both as I can with my Sony MDS-JE520. 2. Selecting Auto Ready (auto pause on Sony decks) requires the external PS/2 keyboard. There doesn't seem to be a front panel method to enable this. 3. Regards SCMS, my thoughts are that this deck does enforce this, although I could check if anyone is interested. Certainly my Tascam MD-CD1 (Mk1) doesn't which is handy for me making backups of my show disks. Hope that is of some use so far! Kevin
  • Create New...