Sammyboy Posted November 9, 2007 Report Share Posted November 9, 2007 I've been hunting all over Ebay and other places now for the docking cradle to go with my rather lonely NH1 unit with no joy so far. I believe that the older N1 model has the same connector as the NH1, and that it's charger uses the same voltage. Could I use the N1's docking cradle on my NH1 without any problems?And if not, do I have any other alternatives available to me? I've ordered a USB cable that fits the unit off Ebay which should be arriving soon, though I think all I can do with this is transfer to/from the unit, and play MDs using the power from the USB port.Any help appreciated, bit frustrating having this piece of kit and not be able to use it! Quote Link to comment Share on other sites More sharing options...
Sammyboy Posted November 10, 2007 Author Report Share Posted November 10, 2007 Would this cradle from an N1/N10 fit my NH1? I'd need a charger too, I have a few chargers from other MDs, but do I need a specific charger? Quote Link to comment Share on other sites More sharing options...
Richard Posted November 10, 2007 Report Share Posted November 10, 2007 Would this cradle from an N1/N10 fit my NH1? I'd need a charger too, I have a few chargers from other MDs, but do I need a specific charger?Even if the connector was the same it wouldn't fit as the socket is in a different position on the NH1. I think you just need to find the correct NH1 / NH3D cradle. Quote Link to comment Share on other sites More sharing options...
Sammyboy Posted November 10, 2007 Author Report Share Posted November 10, 2007 I did wonder about 'modifying' the cradle a bit so the NH1 would fit, but I am keeping my eyes open for a proper NH1 cradle, they seem to be as rare as hen's teeth! Quote Link to comment Share on other sites More sharing options...
Nate A Posted November 10, 2007 Report Share Posted November 10, 2007 NH1 says 6V on the stand, N1 says 3V...no workie even if they did fit. Quote Link to comment Share on other sites More sharing options...
sputnik00 Posted November 14, 2007 Report Share Posted November 14, 2007 hi there, are you talking about the NetMD MZ-N1? if so, i have both the NetMD MZ-N1 and the HiMD NH1 and the docks cannot be used interchangeably. batteries used are also different. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.