kgallen Posted August 14, 2021 Report Share Posted August 14, 2021 (edited) This post was recognized by Christopher! kgallen was awarded the badge 'Great Content' and 250 points. Just so you know I havenāt been sitting on my MD-behind, just reporting that Iāve finally fixed (fingers crossed) the intermittent display on my first (of 2) Tascam MD-CD1 combo decks. This deck is a tidy example I bought a few years back, although I did pay a bit through the nose for it on eBay (about Ā£220 if I remember correctly - far far more than any other deck Iāve bought!). It actually arrived damaged (and not from shipping) - it must have had a knock on the front as the MD pitch control knob was impacted. Internally I had to rebuild one end of the front panel PCB and replace the Alps encoder both of which were broken. Otherwise it worked well until one day when I turned it on -Ā it powered up then went offā¦ one of the power supply regulators emitted the magic smoke. Fortunately I was able to identify the part and find a replacement (on eBay again!) which once fitted got the machine working again. More recently the display has been intermittent until that also finally went off and never came back on (otherwise the machine worked fine).Ā I had a look at it a couple of times but couldnāt find the issue. I had another bash today after swatting up a bit more on VFDs and watched one of Dave Jonesā EEVBlog videos on the subject. Subsequently I identified that the AC cathode supply was dead (the -36V supply I had long suspected was in fact fine). After a bit of debug and falsely suspecting one of the X1/Y2 caps it turned out to be as simple as bad solder joints. Now cleaned up and resoldered Iām happy to report weāve had good behaviour on a āsoak testā for the past hour or so. So not an exciting story but a good outcome anyway. š Ā (Interesting track playing - little message for all of you out there in MD-land!) Ā Edited August 14, 2021 by kgallen Shrunk the photos - posted originally via phone. Quote Link to comment Share on other sites More sharing options...
BearBoy Posted August 14, 2021 Report Share Posted August 14, 2021 Great work restoring another (lovely looking) machine, Kevin. Itās also clearly trying to tell us somethingĀ š Quote Link to comment Share on other sites More sharing options...
Richard Posted August 14, 2021 Report Share Posted August 14, 2021 Nice work Kevin - the deck looks great! Quote Link to comment Share on other sites More sharing options...
kgallen Posted August 14, 2021 Author Report Share Posted August 14, 2021 (edited) Cheers @BearBoyĀ for the endless encouragement! Here we are back together and in the flight case. Chaka is playing againā¦! Ā Ā Edited August 14, 2021 by kgallen Shrunk the photos - posted originally via phone. Quote Link to comment Share on other sites More sharing options...
kgallen Posted August 14, 2021 Author Report Share Posted August 14, 2021 Thanks @Richard! Loving the Disc Pictorials! š Quote Link to comment Share on other sites More sharing options...
Richard Posted August 14, 2021 Report Share Posted August 14, 2021 1 minute ago, kgallen said: Thanks @Richard! Loving the Disc Pictorials! š CheersĀ š Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.