Daijoubu

mmm you could power up the unit but not really charge the batt due to the low wattage of the usb output, you should know about that o.o And i don't think there's anything in the batt pack :shock:

This is odd, the 5+ IS connected to the IC604 and a transistor to detect whenever or not a cable is pluged... The units doesn't use it though.. I beleive that the easieest way would be making a special usb cable with a DC out jack, the unit cannot turn off the batt itself unless something is plugged in (A dumy plug could work too, or some more soldering? ...)

If anyone is brave enough, try to directly solder some wires inside your unit to power up the unit via the USB connector Would be especialy handy for NE410 users (no AC input..) I'm gonna take a look Pin 1: +5 Pin 5: GND Pin 1: +5 Pin 4: GND We could just use a simple resistor, power is pretty regulated in the PC, no need to worry about that :? I think... According to the service manual, the N505 needs: Servo on: Playback: 160mA Recording: 180mA FF/RW: 170mA Pause: 100mA Servo off: Playback: 20mA Pause: 20mA

It is not, did it twice If you're afraid, get the service manual

I posted it somewhere, i compared both PCB side by side and it's missing a lots of conponments

So...no updates on this? At least upgrade phpbb to 2.0.6!!! Beware of known vulnerabilities, if this board ever gets hacked, don't ask whose fault it is :roll:

Check this topic http://forums.minidisc.org/viewtopic.php?p=5863#5863

You need more than SB alone. You must have the UILib and the OpenMG Secure Module installed

LOL! Nice work there! (I neither know how to read these languages )

1.2 Beta2 is already released! Final is coming alone real soon http://invisionboard.com/switch I have it running on my board (88k+ posts, 2.3k+ members) http://ptprophecy.com/forum/ The XMB community seems to be dead :shock: Well IPB board is alive Even the modding communitie is more active http://ibplanet.com

huh, i posted both N810 and N10 serv. manual :shock: IC302 is right under the 301 (N10 service manual) -> 11/12-H/I

That was one of minidisc.org april fool joke

It's not listed in the N10 service manual But it is in the N810 service manual Page 44 for N10 (IC302) Page 42 for N810 (IC361 -> C111/211, R106/206, C163/263, R162/262, R161/261) Abbreviation 3CED : Spanish, Swedish, Portuguese and Finnish model 4CED : French, German, Dutch and Italian model Duno :?

Open it up, short up the service mode bridge Get the service manual for howtos

I personaly think that LAME vbr is better than ATRAC3 And AAC ain't from Apple

Nop, just 2-4 resistors and capacitors

I would say, improved ATRAC3 Quality > Quantity isn't it?

All these 3 are related to MP3 and CD ripping, if you don't know what are these then you don't deserve to use MP3s

The N1 is a problematic unit, many owner have experienced issues with the optical block...search around in this and the minidisct forums

Your db and/or decryption keys gets damaged, losing those .omg datas

Keep in mind, NE410 = No ac plug-in

If you want, you could go to a mac, specialy IPOD forum and start talking about MDs see what will happen

Impedance is the phones internal resistance Sensitivity is the volume delivered for a certain output, the higher is, the higher is the volume Frequency responce: 16hz = bass | 22khz = highs

If you hold the original CD, then checkout a loseless wav instead of transcoding a MP3! Anyway quality wise, i would say EAC is better than CDex

KOSS KSC55 http://www.koss.com/koss/kossweb.nsf/02Pro...55?OpenDocument