imak Posted August 26, 2005 Report Share Posted August 26, 2005 Thank you for releasing ss 3.2 as a standalone installer.installed in 2 PC's but cannot recognise the nh1.The same happened and with 3.1 Mdcf installer.Uninstall/install as the description in FAQ but nothing..... Desperate...Imak Quote Link to comment Share on other sites More sharing options...
Christopher Posted August 26, 2005 Report Share Posted August 26, 2005 State your system specs according to the rules.. Quote Link to comment Share on other sites More sharing options...
imak Posted August 26, 2005 Author Report Share Posted August 26, 2005 State your system specs according to the rules..←1) Sony VAIO VGn-a295hp notebook with WinXP + SP2, 512 Ram2)Fujitsu-Siemens P4 3.2 WinXP +sP1, 1,5 GB RamThe MD unit is a NH1 connected directly to PC's USB port, (no hub used)SonicStage 2.0 works fine, from the original installation CD.I have upgraded the ss 2.0 to 2.3 in the past and it was also working. The installation in Vaio was an upgrade, but in Siemens is a new clean installation.Any help welcome,Thanksimak Quote Link to comment Share on other sites More sharing options...
Christopher Posted August 26, 2005 Report Share Posted August 26, 2005 Upgrade the Siemens to Service Pack 2 and tell me if it works on there. Quote Link to comment Share on other sites More sharing options...
imak Posted August 26, 2005 Author Report Share Posted August 26, 2005 Upgrade the Siemens to Service Pack 2 and tell me if it works on there.←Upgraded.Uninstall / install.No Joy.One thing I noticed is that Simple Burner recognize the himd as soon as I plug it in but sonicstage not.Any idea? Quote Link to comment Share on other sites More sharing options...
Richard Posted August 26, 2005 Report Share Posted August 26, 2005 Upgraded.Uninstall / install.No Joy.One thing I noticed is that Simple Burner recognize the himd as soon as I plug it in but sonicstage not.Any idea?←This is normal SS never recognises my Hi-MD's for about 30 seconds. After this if I then click on my blue transfer button at the top (next to My Library) I can see HI-MD (F:) as a possible destination. Quote Link to comment Share on other sites More sharing options...
imak Posted August 26, 2005 Author Report Share Posted August 26, 2005 This is normal SS never recognises my Hi-MD's for about 30 seconds. After this if I then click on my blue transfer button at the top (next to My Library) I can see HI-MD (F:) as a possible destination.←I' ve been waiting for 30 minutes and over..... Quote Link to comment Share on other sites More sharing options...
Daijoubu Posted August 27, 2005 Report Share Posted August 27, 2005 Make sure your HiMD is NOT connected while the drivers are being installedThe drivers are found @ C:\Program Files\Sony\Personal Audio DriverBut anyhow, I won't recommend installing SS on any VAIO Quote Link to comment Share on other sites More sharing options...
imak Posted August 30, 2005 Author Report Share Posted August 30, 2005 Make sure your HiMD is NOT connected while the drivers are being installedThe drivers are found @ C:\Program Files\Sony\Personal Audio DriverBut anyhow, I won't recommend installing SS on any VAIO←Thank you,I believe the same about the Vaio. Sony's installed application are producing a mess in registry.I don't have the himg unit connected while the SS 3.2 is being installed.Something I noticedis that if I completely uninstall 3.2 and install 2.0 from Sony's CD everything works perfectly. Is there anything else that I can try?Thanks again for helping, Quote Link to comment Share on other sites More sharing options...
alextrevelian_006 Posted August 30, 2005 Report Share Posted August 30, 2005 Thank you for releasing ss 3.2 as a standalone installer.installed in 2 PC's but cannot recognise the nh1.The same happened and with 3.1 Mdcf installer.Uninstall/install as the description in FAQ but nothing..... Desperate...ohh this installer rock!i needed beacuse i dont have a fast internet connection at home. instead, at university, they have a super speed (1000k, now we know in what they invest our money) and this saves me a lot of time and money at home.thanks dude!Imak← Quote Link to comment Share on other sites More sharing options...
imak Posted August 31, 2005 Author Report Share Posted August 31, 2005 ←Stuck.....no solution?Any ideas about make it work?Please.......... Quote Link to comment Share on other sites More sharing options...
Christopher Posted August 31, 2005 Report Share Posted August 31, 2005 Try the MDAC repair tool in the Downloads section. Quote Link to comment Share on other sites More sharing options...
imak Posted September 7, 2005 Author Report Share Posted September 7, 2005 Still nothing.......3d test installation on a IBM thinkpad failed.Cannot find the problem.Simple Burner recognized the nh1 immediately, Sonicstage... no way.Any help please....? Quote Link to comment Share on other sites More sharing options...
The Low Volta Posted September 7, 2005 Report Share Posted September 7, 2005 Any help please....? search the software faq's for recent threads about the same recognition problem... there is a workaround involving the German 3.0 version and I guess you can find it if you look into these other postswell, I looked it up for you: here it is Quote Link to comment Share on other sites More sharing options...
Shozzer Posted September 7, 2005 Report Share Posted September 7, 2005 (edited) I had the same problem the other day for the first time. I have an NH900 and currently use Sonic Stage 3.1. I could not get SS to recognise that the MD was attached. Simple Burner didn't have a problem recognising the MD however.After a lot of playing about and hair tearing I took a DVD that was in the drive out and went back into SS and after a few seconds SS recognised the MD. I would say that the DVD was one I had compiled myself and maybe that confused SS.I hope to upgrade to SS3.2 as I understand that you can upload unlimited times from HI-MD to My Library (is that really the case?). Will the installation overwrite what is already in My Library? Edited September 7, 2005 by Shozzer Quote Link to comment Share on other sites More sharing options...
Shozzer Posted September 7, 2005 Report Share Posted September 7, 2005 I hope to upgrade to SS3.2 as I understand that you can upload unlimited times from HI-MD to My Library (is that really the case?). Will the installation overwrite what is already in My Library?←Have just discovered the topic on software installation and am off for a read... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.