butchc Posted November 8, 2006 Report Share Posted November 8, 2006 Are there any MZ-NH900 owners out there that can answer a quick question for me? If you run your finger over the bottom of the unit in the area where the sticker is with the model number, battery specs etc, can you feel a small, raised, circular bump?The reason I ask is that I have an NH900 that has been playing up, and when I lodged it for a warranty repair at a Sony service center today, the person at the desk pointed out the small raised bump on the bottom of mine and said that it's likely to be rejected as a warranty repair because this bump indicates that the unit has probably been mistreated! The lady made a point of mentioning this bump on the warranty form. I had never even noticed this raised area before - it's not very noticable unless you're looking for it. I'm sure I've never mistreated my unit - it hasn't been used much, and always lives in a padded case.I also happen to have another identical MZ-NH900 which I bought as a backup. This one has seen very little use, and it's also got exactly the same small, very slightly raised circular bump in the back - not really noticeable until I run my fingers over it. This makes me think that this is a standard feature on these units, but I'd love to know if other people with this unit are able to feel this same "bump".Hopefully my warranty claim will be accepted, but if not it'd be nice to have some evidence to support my view that this very subtle "bump" is not evidence of mistreatment!Thanks all. Quote Link to comment Share on other sites More sharing options...
nickel Posted November 8, 2006 Report Share Posted November 8, 2006 LOL! You have to buy more MZ-NH900 as a backup. Some 20 of them will be enough i think. Quote Link to comment Share on other sites More sharing options...
Hungerdunger Posted November 8, 2006 Report Share Posted November 8, 2006 (edited) Are there any MZ-NH900 owners out there that can answer a quick question for me? If you run your finger over the bottom of the unit in the area where the sticker is with the model number, battery specs etc, can you feel a small, raised, circular bump?I don't know whether this helps but I have a small circular depression on mine. It wasn't really visible until I started rubbing the label with my thumbnail, but now it's quite clear.It's about half way down the label and about one third in from the left.HTH Edited November 8, 2006 by Hungerdunger Quote Link to comment Share on other sites More sharing options...
butchc Posted November 8, 2006 Author Report Share Posted November 8, 2006 LOL! You have to buy more MZ-NH900 as a backup. Some 20 of them will be enough i think.Yes, I can see the funny side of that . Still I'm glad to have my "backup" now, and was very glad to have it on the weekend when I needed it to record a gig I played.I don't know whether this helps but I have a small circular depression on mine. It wasn't really visible until I started rubbing the label with my thumbnail, but now it's quite clear.It's about half way down the label and about one third in from the left.HTHInteresting. Thanks for the info anyway. Quote Link to comment Share on other sites More sharing options...
sector001 Posted November 8, 2006 Report Share Posted November 8, 2006 i dont notice any bumps on indentions on my NH900, which version do u have? mine is the austrailian version. Quote Link to comment Share on other sites More sharing options...
grf Posted November 8, 2006 Report Share Posted November 8, 2006 Hi,I too have a circular depression roughly in the middle of the lable on the back. If this was full of air it would look like a small (5mm) raised bump.grf Quote Link to comment Share on other sites More sharing options...
MusicBringer Posted November 8, 2006 Report Share Posted November 8, 2006 My NH900 label is totally flat with no lumps nor bumps. (Bought in the UK)It's about half way down the label and about one third in from the left.Although if I try real hard I think there is something such as a screw head where Hungerdunger describes. Hard to feel it though. Quote Link to comment Share on other sites More sharing options...
sector001 Posted November 8, 2006 Report Share Posted November 8, 2006 My NH900 label is totally flat with no lumps nor bumps. (Bought in the UK)Although if I try real hard I think there is something such as a screw head where Hungerdunger describes. Hard to feel it though.very odd indeed............... Quote Link to comment Share on other sites More sharing options...
bogon07 Posted November 9, 2006 Report Share Posted November 9, 2006 Same as Sector (Australian version too) could not detect any bumps or depressions under the label. Quote Link to comment Share on other sites More sharing options...
rayzray Posted November 9, 2006 Report Share Posted November 9, 2006 i (rayzray) have a very noticable "bump" on one of my two 900's ,, and,, no bump on the other, but, it has a small (depression) instead. i bought them from the same place only a month of two apart. Quote Link to comment Share on other sites More sharing options...
sharpsony Posted November 9, 2006 Report Share Posted November 9, 2006 I can confirm that there is a "bump" under the label on the back of my NH900 (bought in Germany). It is clearly detectable by moving the fingertips over it and even faintly visible under certain light conditions. I think, it is indeed caused by a screw head hidden under the label.By the way, I treat my MD recorders extremely carefully . Quote Link to comment Share on other sites More sharing options...
butchc Posted November 9, 2006 Author Report Share Posted November 9, 2006 Thanks everyone for your replies. I think they confirm that having a small "bump" (or even a depression) under the label on a NH900 isn't necessarily evidence of an abused/mistreated unit!I'm told it could be a couple of weeks before I hear back from Sony as to whether they will repair my unit under warranty or not. Hopefully the techs that look at the unit won't have the same view of the "bump" as the lady who checked my unit in! Quote Link to comment Share on other sites More sharing options...
sector001 Posted November 9, 2006 Report Share Posted November 9, 2006 Thanks everyone for your replies. I think they confirm that having a small "bump" (or even a depression) under the label on a NH900 isn't necessarily evidence of an abused/mistreated unit!I'm told it could be a couple of weeks before I hear back from Sony as to whether they will repair my unit under warranty or not. Hopefully the techs that look at the unit won't have the same view of the "bump" as the lady who checked my unit in!what's wrong with it exactly? does it still record? Quote Link to comment Share on other sites More sharing options...
butchc Posted November 12, 2006 Author Report Share Posted November 12, 2006 what's wrong with it exactly? does it still record?It plays and records fine in the first part of a disc, but there are frequent gaps of several seconds in the sound when playing the last 30% or so of a disc. The timer display continues to tick over, but the sound drops out. At first I thought I had a problem disc, but I tried other discs with the same results. Other people have reported the same problem on this board with the MZ-NH900.I think the gap problem affects both recording and playback, because I had the gap problem on my 2nd unit when I used a disc recorded on the one that has the problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.